TRIG TT21NOW IN STOCK

[Tim Mara[_2_]]

I have the TRIG TT21 Modde S transponders in stock now.WITH US FAA TSO!
Please call to order
thanks
Tim
Wings & Wheels
Please visit the Wings & Wheels website at www.wingsandwheels.com

[Paul Remde]

Hi,

I have them in stock also.

I also have wiring harnesses in stock for connecting the control head to the
transponder.

Paul Remde
Cumulus Soaring, Inc.

"Tim Mara" > wrote in message
...
>I have the TRIG TT21 Modde S transponders in stock now.WITH US FAA TSO!
> Please call to order
> thanks
> Tim
> Wings & Wheels
> Please visit the Wings & Wheels website at www.wingsandwheels.com
>
>

[Al[_7_]]

> I also have wiring harnesses in stock for connecting the control head to the
> transponder.


Er... isnt that part of the package

Tim do you have the harnesses too?

I couldn't find one on ebay yet....

Anyone else go these in stock?

[Peter Purdie[_3_]]

The placing of the main unit relative to the control head is a very
variable distance - I have done one on a ragwing microlight where it was 6
inches, and another on a 3-axis where it was 10 feet.

The kit includes the connectors, but leaves the installer to join the dots
with appropriate cable.

AFE in UK includes providing a harness of customer defined length (plus
the antenna cable) in the base price.

You need a professional (expensive) crimp tool to use the factory supplied
aviation standard D connectors - you can use solder bucket ones for reduced
reliability, which is why getting it done properly by the supplier is a
good idea.
At 04:41 29 September 2009, Al wrote:
>
>> I also have wiring harnesses in stock for connecting the control head
to
>the
>> transponder.
>
>
>Er... isnt that part of the package
>
>Tim do you have the harnesses too?
>
>I couldn't find one on ebay yet....
>
>Anyone else go these in stock?
>
>
>

[Paul Remde]

Hi Al,

The TT21 comes with all the required connectors. But the connectors require
the use of a crimping tool to connect the wires to the pins.

I offer a pre-wired wiring harness made by Larry Goddard in 2 lengths: 0.5m
and 3m. Custom lengths are available upon request.

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

"Al" > wrote in message
...
>
>> I also have wiring harnesses in stock for connecting the control head to
>> the
>> transponder.
>
>
> Er... isnt that part of the package
>
> Tim do you have the harnesses too?
>
> I couldn't find one on ebay yet....
>
> Anyone else go these in stock?
>
>

[Tim Mara[_2_]]

The TT 21 does come with connectors and installation kit but not cables, the
connectors are simple crimp types and can be done with rather
unsophisticated crimp tools but I also offer a very low cost soldered cable
set for the TT21 for those who buy the transponders. 2' cables will be
standard, but optional custom harnesses to longer lengths available with
rather short delays. Please see my website for options and prices.
I also offer several other harnesses for radios an other transponders,
usually from the manufacturers of the respective equipment but will be
offering similar sets made here by a professional electronics
manufacturer..all with Aircraft grade Tefzel wire.
tim
Please visit the Wings & Wheels website at www.wingsandwheels.com

"Al" > wrote in message
...
>
>> I also have wiring harnesses in stock for connecting the control head to
>> the
>> transponder.
>
>
> Er... isnt that part of the package
>
> Tim do you have the harnesses too?
>
> I couldn't find one on ebay yet....
>
> Anyone else go these in stock?
>
>