PDA

View Full Version : DG1000 Tail Battery


pp2076
April 28th 10, 07:57 AM
Does anyone have details of the fin (tail) battery used in the DG1000
ie make and model?
I presume that this is an off-the-shelf item rather than something
custom made for DG.
Any details appreciated, especially contact details of a
supplier( even better if that supplier is in Australia :) )
Thanks

weersch[_2_]
April 28th 10, 08:57 AM
We had a damaged/worn-out tail battery in our club DG1000S.
We ordered a replacement from DG at a very high cost.
After that I disassembled the original.
It consisted simply of 4 Panasonic LC-R067 R2P (6Volt, 7.2 Ah)
batteries.
150mm x 94 mm x 34mm each.
Switched 2 serial x 2 parallel for a total of 12V, 14.4 Ah.
All of it is simply double-sided taped to eachother and to a flat
aluminum strip ending in the bracket with fuse, connector and grip on
top.
Then heat shrink wrapped.
Would have been very easy to replace yourself with some very basic
handyman experience at a cost of about US$75.
Hans Van Weersch

Google