Continental O200 bolt part number

[Philippe[_4_]]

Hello,

page 2-11 in IPC,
I see AN502-10-8 for #16 (vaccum pump drive gear bolts)

When I disasemble my O200, I found 12 point flange bolt and
drill head for safety wire.

Is any body known the part number for this bolts?
Is any body known where I may find a socket for this head?

No room for hex head.

thanks
--
http://www.youtube.com/v/k6AP4SbRHNo&hl=fr_FR&fs=1&rel=0
Philippe Vessaire ҿӬ

[jerry wass]

Philippe wrote:
> Hello,
>
> page 2-11 in IPC,
> I see AN502-10-8 for #16 (vaccum pump drive gear bolts)
>
> When I disasemble my O200, I found 12 point flange bolt and
> drill head for safety wire.
>
> Is any body known the part number for this bolts?
> Is any body known where I may find a socket for this head?
>
> No room for hex head.
>
> thanks

Howdy Phil,--Aren't you building a Hatz??--me Kelly-D

The 12 point heads accept standard SAE wrench sizes in 12 point
sockets--they are not easy to find--I only found the 1/4" sockets at a
surplus store in a 1/4"drive deep socket-(about 2" overall length).

As to the bolts I have some various sizes mostly COARSE thread in the
smaller sizes..let me know what you need & maybe I can mail it.. Jerry
wassbiplane