ryanglover1969[_2_]
August 21st 10, 10:55 PM
On Aug 21, 1:12*pm, JJ Sinclair > wrote:
> As a matter of fact I purchased the Wng Flattener from Dick just
> before his untimley death. It is necessary to flatten both the top and
> bottom of both wings to get maximum perormance increase. You must
> carefully remove all wax and contaminates before placing your wings
> into the molds. Then plug it into 220 (3-phase) current and select 75
> amps to start with. If after an hour the wings arent flat then turn
> the selector up to max (100 amps) and wait another hour. I charge
> $1000 per side, so both sides of both wings will run you $4000 with a
> 10% discount for FNG's
>
> Dick also sold me the rights to his Wing Stretcher which will run you
> $1000 per meter. Expencive, but one customer is ecstatic over his 30
> meter Libelle!
> JJ
Very interesting indeed!
> As a matter of fact I purchased the Wng Flattener from Dick just
> before his untimley death. It is necessary to flatten both the top and
> bottom of both wings to get maximum perormance increase. You must
> carefully remove all wax and contaminates before placing your wings
> into the molds. Then plug it into 220 (3-phase) current and select 75
> amps to start with. If after an hour the wings arent flat then turn
> the selector up to max (100 amps) and wait another hour. I charge
> $1000 per side, so both sides of both wings will run you $4000 with a
> 10% discount for FNG's
>
> Dick also sold me the rights to his Wing Stretcher which will run you
> $1000 per meter. Expencive, but one customer is ecstatic over his 30
> meter Libelle!
> JJ
Very interesting indeed!