PDA

View Full Version : Bendix T12 D ADF

Henning DE
October 27th 03, 09:06 PM
Hello to all !
I know this is stoneage history stuff but
does anybody have a pinout for the Bendix T12D ADF reciever ?
Any other info welcomed too.

Henning DE
Mike Wylde
October 28th 03, 06:15 PM
I have it for a T12C do you know if it's the same?

"Henning DE" > wrote in message
om...
> Hello to all !
> I know this is stoneage history stuff but
> does anybody have a pinout for the Bendix T12D ADF reciever ?
> Any other info welcomed too.
>
> Henning DE
Henning DE
October 29th 03, 05:22 PM
Yes, I think it is more or less the same.

Regards,
Henning DE
Mike Wylde
October 30th 03, 10:41 PM
OK I'll dig it out give me a day or two.

"Henning DE" > wrote in message
m...
> Yes, I think it is more or less the same.
>
> Regards,
> Henning DE
Mike Wylde
October 31st 03, 11:02 PM
Pinouts for T12C - hope D is same.

1 sense antenna
2 shield
3 loop input R1 (comes via the indicator not direct)
4 loop input R2 (as above)
5 to optional audio amplifier A+
6 + supply for dial lamp from dimmer control
7 tuning meter
8 47Hz switching (to indicator)
9 ground
10 servo DC out #1
11 emergency power supply
12 47Hz switching (to indicator)
13 servo DC out #2
14 headset 500 ohm
15 DC in
16 ADF servo signal out

Hope this helps

Mike

"Henning DE" > wrote in message
om...
> Hello to all !
> I know this is stoneage history stuff but
> does anybody have a pinout for the Bendix T12D ADF reciever ?
> Any other info welcomed too.
>
> Henning DE
Henning DE
November 3rd 03, 03:18 PM
Hello Mike !

Thanks a lot !

As far as i can say, the pinouts are the same.
The "audio out" has not been used on my T12D.
Now i know where to connect the wires.

Keep on flying !

Henning DE
Google