Flarm v5

[Kevin Neave[_2_]]

Hi All

Flarm v5 was due to be released in "early" February, and earlier
versions should start reporting an error if used after beginning of
March.

As yet there's no version 5 available on the "updates" page of the
Flarm website.

Anyone know when v5 *will* be available?

Kevin

[pilot]

Flarm v5.00 is available with immeadiate effect at
http://www.flarm.com/support/updates/index_en.html

[Andy[_1_]]

On Feb 22, 9:29*am, pilot > wrote:
> Flarm v5.00 is available with immeadiate effect athttp://www.flarm.com/support/updates/index_en.html


The last item in 5.xx revison history published at that site is:

" 4.90 2010/12/31
----------------
Public BETA, partial pre-release of v5.00 for FLARM classic units
(incl. IGC and ENL versions),
not yet for compatible designs.
Please send feedback and IGC logfiles to
The beta 4.90 is fully compatible with all other FLARM units.
It is operational till end of Febuary 2011 and must be replaced with
release 5.00 then."

However the user agreement associated with the download ends with "©
2011 Flarm Technology • Disclaimer • 22.02.2011 " which is today's
date.

Maybe the new firmware is actually available for download but the
revision history has not been updated yet?

Andy

[johngalloway[_2_]]

On Feb 22, 5:21*pm, Andy > wrote:
> On Feb 22, 9:29*am, pilot > wrote:
>
> > Flarm v5.00 is available with immeadiate effect athttp://www.flarm.com/support/updates/index_en.html
>
> The last item in 5.xx revison history published at that site is:
>
> " 4.90 2010/12/31
> ----------------
> Public BETA, partial pre-release of v5.00 for FLARM classic units
> (incl. IGC and ENL versions),
> not yet for compatible designs.
> Please send feedback and IGC logfiles to
> The beta 4.90 is fully compatible with all other FLARM units.
> It is operational till end of Febuary 2011 and must be replaced with
> release 5.00 then."
>
> However the user agreement associated with the download ends with "©
> 2011 Flarm Technology • Disclaimer • 22.02.2011 " which is today's
> date.
>
> Maybe the new firmware is actually available for download but the
> revision history has not been updated yet?
>
> Andy

V5 for SD cards is at:

http://www.flarm.com/support/updates/SD_Nutzung_index_en.html

John Galloway

[Andy[_1_]]

On Feb 22, 12:35*pm, johngalloway > wrote:
> On Feb 22, 5:21*pm, Andy > wrote:
>
>
>
>
>
> > On Feb 22, 9:29*am, pilot > wrote:
>
> > > Flarm v5.00 is available with immeadiate effect athttp://www.flarm.com/support/updates/index_en.html
>
> > The last item in 5.xx revison history published at that site is:
>
> > " 4.90 2010/12/31
> > ----------------
> > Public BETA, partial pre-release of v5.00 for FLARM classic units
> > (incl. IGC and ENL versions),
> > not yet for compatible designs.
> > Please send feedback and IGC logfiles to
> > The beta 4.90 is fully compatible with all other FLARM units.
> > It is operational till end of Febuary 2011 and must be replaced with
> > release 5.00 then."
>
> > However the user agreement associated with the download ends with "©
> > 2011 Flarm Technology • Disclaimer • 22.02.2011 " which is today's
> > date.
>
> > Maybe the new firmware is actually available for download but the
> > revision history has not been updated yet?
>
> > Andy
>
> V5 for SD cards is at:
>
> http://www.flarm.com/support/updates/SD_Nutzung_index_en.html
>
> John Galloway- Hide quoted text -
>
> - Show quoted text -

Yes, that's where I copied my quote from. But look at the 5.xx revison
history which is the source of the other quote.

Andy

[pilot]

On 22 Feb., 18:21, Andy > wrote:
> The last item in 5.xx revison history published at that site is:
>
> " 4.90 2010/12/31
> Maybe the new firmware is actually available for download but the
> revision history has not been updated yet?

correct, was not yet updated; done now.