Pitch and Diameter of 3 blade prop for IO-360 200HP

[Bart D. Hull]

Does anybody know the Pitch and Diameter of 3 blade
prop for IO-360, 200HP? I looked at various prop
manufacturer websites but could not decode their
prop reference numbers.

I'm looking to match pitch and diameter for a
200MPH fast-glass kit with a Subaru engine.

Thanks

--
Bart D. Hull

Tempe, Arizona

Check http://www.inficad.com/~bdhull/engine.html
for my Subaru Engine Conversion
Check http://www.inficad.com/~bdhull/fuselage.html
for Tango II I'm building.

[Jan Carlsson]

Bart,

You can not say that that engine or that engine have diameter XX, every
engine-airplane combination have its optimal diameter, but it allso depends
on thickness of the blade (material) Nr of Blade, and purpose of the
propeller installation.

200 hp, 200 MPH and 2700 RPM 3blade = 68" to 65" Diameter, 78" to 83" pitch

Jan Carlsson
www.jcpropellerdesign.com

"Bart D. Hull" > skrev i meddelandet
...
> Does anybody know the Pitch and Diameter of 3 blade
> prop for IO-360, 200HP? I looked at various prop
> manufacturer websites but could not decode their
> prop reference numbers.
>
> I'm looking to match pitch and diameter for a
> 200MPH fast-glass kit with a Subaru engine.
>
> Thanks
>
> --
> Bart D. Hull
>
> Tempe, Arizona
>
> Check http://www.inficad.com/~bdhull/engine.html
> for my Subaru Engine Conversion
> Check http://www.inficad.com/~bdhull/fuselage.html
> for Tango II I'm building.
>
>