Latest Nano update

[Ventus2NZ]

When my Nano carried out an auto update Nov 24th, the config program
could not be opened. I removed the updated config program and copied
the previous version back onto the micro sd card and all back to
normal.

Has any one else found this problem?

[Private]

"Ventus2NZ" > wrote in message
...
> When my Nano carried out an auto update Nov 24th, the config program
> could not be opened. I removed the updated config program and copied
> the previous version back onto the micro sd card and all back to
> normal.
>
> Has any one else found this problem?


http://blogs.wsj.com/digits/2011/11/21/surveillance-company-says-it-sent-fake-itunes-flash-updates-documents-show/

[Paul Remde]

Hi,

Did you download the new version of the configuration program manually, or
use the update feature in the software? If you downloaded it manually, it
may be that you saved it with the wrong file extension.

Both of those methods have worked great for me.

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

"Ventus2NZ" > wrote in message
...
> When my Nano carried out an auto update Nov 24th, the config program
> could not be opened. I removed the updated config program and copied
> the previous version back onto the micro sd card and all back to
> normal.
>
> Has any one else found this problem?

[Ventus2NZ]

On Nov 26, 3:02*pm, "Paul Remde" > wrote:
> Hi,
>
> Did you download the new version of the configuration program manually, or
> use the update feature in the software? *If you downloaded it manually, it
> may be that you saved it with the wrong file extension.
>
> Both of those methods have worked great for me.
>
> Best Regards,
>
> Paul Remde
> Cumulus Soaring, Inc.
>

The first time it used the auto update feature that is part of the
Nano config program. After re installing the previous version and
confirmed it was operating, I manually downloaded the new config
program direct from the LX website. I then copied the config program
Version 1.4.5.0 into the Nano. This resulted in the config program not
working again. I copied the prev version back in and it worked fine.
It appears the latest config program ver 1.4.5.0 has a bug in it.

[Mike[_37_]]

On Nov 25, 7:47*pm, Ventus2NZ > wrote:
> On Nov 26, 3:02*pm, "Paul Remde" > wrote:
>
> > Hi,
>
> > Did you download the new version of the configuration program manually, or
> > use the update feature in the software? *If you downloaded it manually, it
> > may be that you saved it with the wrong file extension.
>
> > Both of those methods have worked great for me.
>
> > Best Regards,
>
> > Paul Remde
> > Cumulus Soaring, Inc.
>
> The first time it used the auto update feature that is part of the
> Nano config program. After re installing the previous version and
> confirmed it was operating, I manually downloaded the new config
> program direct from the LX website. I then copied the config program
> Version 1.4.5.0 into the Nano. This resulted in the config program not
> working again. I copied the prev version back in and it worked fine.
> It appears the latest config program ver 1.4.5.0 has a bug in it.

Had a similar problem.

[Paul Remde]

Hi,

I'm sorry to hear about the issue with the latest version of the Nano Config
program. I don't know whether or not I have tried that version.

I'll copy LXNAV on this note so they are aware of the issue.

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

"Ventus2NZ" > wrote in message
...
On Nov 26, 3:02 pm, "Paul Remde" > wrote:
> Hi,
>
> Did you download the new version of the configuration program manually, or
> use the update feature in the software? If you downloaded it manually, it
> may be that you saved it with the wrong file extension.
>
> Both of those methods have worked great for me.
>
> Best Regards,
>
> Paul Remde
> Cumulus Soaring, Inc.
>

The first time it used the auto update feature that is part of the
Nano config program. After re installing the previous version and
confirmed it was operating, I manually downloaded the new config
program direct from the LX website. I then copied the config program
Version 1.4.5.0 into the Nano. This resulted in the config program not
working again. I copied the prev version back in and it worked fine.
It appears the latest config program ver 1.4.5.0 has a bug in it.

[6X]

I just purchased a Nano and Nexus 7 to communicate with the recorder via bluetooth. All is working on uploads from the Nano to the Nexus but I cannot communicate the other direction from the Nexus to the Nano. The Nexus freezes and does not complete the upload leaving a temp file on the Nano. As a result I cannot declare a task with the Nexus. Anyone have suggestions or experience something similar? Uros from LXNAV has indicated that he has same hardware and can declare tasks without issue.

JeffR