Log in

View Full Version : Ka-6 Oxygen


Peter von Tresckow
January 3rd 12, 05:01 PM
So I'm thinking about maybe going to the carolina wave camp, but my flatland
Ka-6Cr isn't equipped with O2. I seem to recall that the round hole in the
bulkhead on the right side behind the pilot is intended to hold a bottle.

What size bottle is supposed to fit in there?

Thanks

Peter
N4793T

Peter Scholz[_3_]
January 3rd 12, 06:13 PM
Am 03.01.2012 18:01, Peter von Tresckow wrote:
> So I'm thinking about maybe going to the carolina wave camp, but my flatland
> Ka-6Cr isn't equipped with O2. I seem to recall that the round hole in the
> bulkhead on the right side behind the pilot is intended to hold a bottle.
>
> What size bottle is supposed to fit in there?
>
> Thanks
>
> Peter
> N4793T
>
>

It probably was made for a standard 3 Liter steel bottle, diameter is
100mm, length of the bottle ca. 50 cm (without the valve). This is the
usual standard in Schleicher planes.

--
Peter Scholz
ASW24 JE

Tim Mara
January 3rd 12, 06:19 PM
most K6's had a tube for mounting oxygen bottles, unfortunately the tube fit
the european bottles that are just a smidge smaller OD than they typical US
Bottles and their bottles didn't include a blow out fixture and therefore
don't pass US DOT standards and cannot be used....so it may require a
smaller size system to fit but the newer systems utilizing oxysaver cannulas
and even Aerox DDO2 systems the systems are far more efficient than the old
system sand duration can be very similar to the older larger
bottles.....these new systems can be quickly added since they are completely
portable and don't even require any installation, or paperwork.
please see http://www.wingsandwheels.com/page35.htm for more data
tim

"Peter von Tresckow" > wrote in message
...
> So I'm thinking about maybe going to the carolina wave camp, but my
> flatland Ka-6Cr isn't equipped with O2. I seem to recall that the round
> hole in the bulkhead on the right side behind the pilot is intended to
> hold a bottle.
>
> What size bottle is supposed to fit in there?
>
> Thanks
>
> Peter
> N4793T
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 6765 (20120103) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>



__________ Information from ESET NOD32 Antivirus, version of virus signature database 6765 (20120103) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

Wayne Paul
January 4th 12, 03:42 AM
Peter,

I had the EDS system coupled to their 11 cu foot "F" Kevlar bottle. The
bottle fit the Ka-6E hole once it was rapped with a layer of felt.

http://www.mhoxygen.com/index.php?option=com_content&view=category&layout=blog&id=6&Itemid=66
http://www.mhoxygen.com/index.php?option=com_content&view=category&layout=blog&id=23&Itemid=2
http://www.mhoxygen.com/index.php?option=com_content&view=article&id=54&Itemid=49

Wayne



"Peter von Tresckow" wrote in message ...

So I'm thinking about maybe going to the carolina wave camp, but my flatland
Ka-6Cr isn't equipped with O2. I seem to recall that the round hole in the
bulkhead on the right side behind the pilot is intended to hold a bottle.

What size bottle is supposed to fit in there?

Thanks

Peter
N4793T

Google