flight level in Flight simulator

[Robert]

Hi!

I have three questions about fling in FS.

1. what does it mean when ATC says. climb at FL290, for example. what
height is it?

2. when ATC said that I have do climb to 11,000 and reached that level
ATC said that I`m 2000m above my flight level. Internationa settings
are set to metres. but also if I set the settings to feets the numbers
were not coresponding.

3. what should I do whet ATIS or ATC says, i do not know exactly,
something about the pressure or height on target airport.

Thanks in advance
Robert

[CanadianPilot]

"Robert" > wrote in message
om...
> Hi!
>
> I have three questions about fling in FS.
>
> 1. what does it mean when ATC says. climb at FL290, for example. what
> height is it?
29000 ft
>
> 2. when ATC said that I have do climb to 11,000 and reached that level
> ATC said that I`m 2000m above my flight level. Internationa settings
> are set to metres. but also if I set the settings to feets the numbers
> were not coresponding.
>
could be that your altimeter is not set up propelly have a look on the right
side you have a moveable scale from 28.00 to 31.00 that where when ATIS or
ATC tell you the setting you need to enter it

> 3. what should I do whet ATIS or ATC says, i do not know exactly,
> something about the pressure or height on target airport.
>
> Thanks in advance
> Robert

[treefroginometry]

"Robert" > wrote in message
om...
> Hi!
>
> I have three questions about fling in FS.
>
> 1. what does it mean when ATC says. climb at FL290, for example. what
> height is it?

This question might be more applicable in rec.aviation.simulators

FL290 would be 29,000ft

[shywon]

Robert wrote:

> Hi!
>
> I have three questions about fling in FS.
>
> 1. what does it mean when ATC says. climb at FL290, for example. what
> height is it?


29,000 feet


> 2. when ATC said that I have do climb to 11,000 and reached that level
> ATC said that I`m 2000m above my flight level. Internationa settings
> are set to metres. but also if I set the settings to feets the numbers
> were not coresponding.


You probobly did not set your altimeter by pressing B


> 3. what should I do whet ATIS or ATC says, i do not know exactly,
> something about the pressure or height on target airport.


Press B to set the altimeter


>
> Thanks in advance
> Robert
>