Discus B instrument panel template

[[email protected]]

Ladies and gents,

If anyone happens to have a .pdf .jpg .dxf or pretty much .anything format of a Discus B panel (or Ventus B/C) it would be most appreciated. Email to Charlie Juliet Lima Seven Six @me.com or the email in my username. Thank you!

Casey.

[Dave Nadler]

On Friday, December 7, 2012 8:16:16 AM UTC-5, wrote:
> Ladies and gents,
>
>
>
> If anyone happens to have a .pdf .jpg .dxf or pretty much .anything format of a Discus B panel (or Ventus B/C) it would be most appreciated. Email to Charlie Juliet Lima Seven Six @me.com or the email in my username. Thank you!
>
>
>
> Casey.

Yo Casey - If you're redoing the panel and this thing still
has the old sheet-aluminum panel, do replace it with flanged
fiberglass panel for your safety...
See ya, Dave

[John Galloway[_1_]]

Not sure if you are referring to a lifting panel or not but here
are a couple of links, the first for lifting panel diagrams and the
second for a replacement non-lifting panel.

http://www.mandhsoaring.com/Panels/Panel_CS.pdf

http://svsponline.co.uk/Instrument-Panel-Blanks.html

John Galloway



At 13:46 07 December 2012, Dave Nadler wrote:
>On Friday, December 7, 2012 8:16:16 AM UTC-5,
wrote:
>> Ladies and gents,
>>
>>
>>
>> If anyone happens to have a .pdf .jpg .dxf or pretty much
anything
>format of a Discus B panel (or Ventus B/C) it would be most
appreciated.
>Email to Charlie Juliet Lima Seven Six @me.com or the email
in my username.
> Thank you!
>>
>>
>>
>> Casey.
>
>Yo Casey - If you're redoing the panel and this thing still
>has the old sheet-aluminum panel, do replace it with flanged
>fiberglass panel for your safety...
>See ya, Dave
>

[[email protected]]

Thank you Dave, John and those who responded offline. Mission accomplished. :)

[Tom J Designs]

Hi
I know is old post, but where can I buy fibreglass or carbon panel for discus b please?
Made one with 3mm aluminium sheet to replace old one which was alloy plate too.

Thanks
Tom

[[email protected]]

M and H soaring if you are in the USA.

[[email protected]]

Severn Valley Sailplanes made mine and CNC cut (instrument cutouts & mounting holes) to the specs I sent. Fast, friendly, reasonably priced and shipped to the USA.

CJ

[David Salmon[_3_]]

At 14:02 20 October 2017, wrote:
>Severn Valley Sailplanes made mine and CNC cut (instrument cutouts &
>mounting holes) to the specs I sent. Fast, friendly, reasonably priced
and
>shipped to the USA.
>
>CJ
>
Unfortunately SVS has shut down.
Dave

[Martin Gregorie[_5_]]

On Fri, 20 Oct 2017 16:35:28 +0000, David Salmon wrote:

> Unfortunately SVS has shut down.
>
Their shop closed on 1st Oct (temporarily it says) but the rest of the
site seems to be up and running.

Do you know if/when the shop is going to return? Bit of a bugger if it
doesn't because they've always been my first stop if I need stuff for my
glider.


--
martin@ | Martin Gregorie
gregorie. | Essex, UK
org |

[Glen Douglas]

Martin Carolan posted on uras some time ago, that shop had been for sale
with no takers and has closed for good
G

At 19:15 20 October 2017, Martin Gregorie wrote:
>On Fri, 20 Oct 2017 16:35:28 +0000, David Salmon wrote:
>
>> Unfortunately SVS has shut down.
>>
>Their shop closed on 1st Oct (temporarily it says) but the rest of the
>site seems to be up and running.
>
>Do you know if/when the shop is going to return? Bit of a bugger if it
>doesn't because they've always been my first stop if I need stuff for my
>glider.
>
>
>--
>martin@ | Martin Gregorie
>gregorie. | Essex, UK
>org |
>

[Martin Gregorie[_5_]]

On Fri, 20 Oct 2017 20:23:58 +0000, Glen Douglas wrote:

> Martin Carolan posted on uras some time ago, that shop had been for sale
> with no takers and has closed for good G
>
Thanks for confirmation that temporarily == permanently


--
martin@ | Martin Gregorie
gregorie. | Essex, UK
org |

[[email protected]]

We (my buddy and I) have a Discus B that was retrofitted with a fiberglass panel that has the thigh-protector shaping on the bottom. It had gotten pretty cut up with modifications so we made a female mold, and have made replicants ... and if you want one give me an email.