help with KMA20

[Cliff]

I have a KMA20 installed with 2 KX175B's. Where do I set the AUTO,COM1,COM2
toggle and rocker switches? I do have a 4P intercom and speakers. I would
like to set COM1 as primary and COM2 on 121.5 for monitor.

Thanks
Cliff

[Aldo]

"Cliff" > wrote in message
...
> I have a KMA20 installed with 2 KX175B's. Where do I set the
AUTO,COM1,COM2
> toggle and rocker switches? I do have a 4P intercom and speakers. I would
> like to set COM1 as primary and COM2 on 121.5 for monitor.
>
> Thanks
> Cliff
>
It's been a while but......for the setup setup you requested the transmit
switch (rotary) would go to COM1, the AUTO switch either full up for speaker
or full down for phones, COM1 in center position and COM2 either full up for
speaker or full down for phones. The row of switches direct the sound, up
being "speaker", center being "off" and down being "phones". The AUTO
switch directs the reception from the transceiver selected by the rotary
switch to the selected path (up for speaker, down for phones.

Hope this helps.

Allen

[DP]

On Sun, 11 Apr 2004 13:11:53 GMT, "Aldo" >
wrote:

>
>"Cliff" > wrote in message
...
>> I have a KMA20 installed with 2 KX175B's. Where do I set the
>AUTO,COM1,COM2
>> toggle and rocker switches? I do have a 4P intercom and speakers. I would
>> like to set COM1 as primary and COM2 on 121.5 for monitor.
>>
>> Thanks
>> Cliff
>>
>It's been a while but......for the setup setup you requested the transmit
>switch (rotary) would go to COM1, the AUTO switch either full up for speaker
>or full down for phones, COM1 in center position and COM2 either full up for
>speaker or full down for phones. The row of switches direct the sound, up
>being "speaker", center being "off" and down being "phones". The AUTO
>switch directs the reception from the transceiver selected by the rotary
>switch to the selected path (up for speaker, down for phones.
>
>Hope this helps.
>
>Allen
>
You remembered correctly....and saved me a bunch of typing !!!!!!!!!


Don Paquette
PP-ASEL
N9723X