Terminal Strip with Integral fuse

[SF]

Terminal Strip with an integral mini blade style fuse.

www.asi-ez.com

Item: MF901GR, type MFPA.4 Screw clamp blade fuse terminal block gray.
Item: PTC0400, push in bridge for 6mm terminal blocks, 42 positions.

This terminal strip is larger than I really want it to be, but it is the smallest that I can find with integral fuses. Using integral fuses gives you an individual fuse on every load, lessens the number of connections, and reduces the behind the panel clutter.

You have to reach your own decision as to the suitability of this for your glider. I'm not suggesting it, I'm merely responding to a request on an earlier thread to report what I found. This does not replace the need for a fuse on every battery as close as possible to the battery terminals.

SF

[Dave Nadler]

Or these:

http://www.digikey.com/product-detail/en/15600-08-21/283-3697-ND/1645038

http://www.newark.com/jsp/search/browse.jsp?N=422+2203+200607+810319992&Ntk=gensearch&Ntt=fuse+block&Ntx=mode+matchallpartial&displaytext=&isGoback=false&resultsPageURL=/jsp/search/results.jsp&isRedirect=false&No=0&getResults=true&appliedparametrics=true&locale=en_US&divisionLocale=en_US&catalogId=&skipManufacturer=false&skipParametricAttributeId=&prevNValues=422+2203+200607+810319992+810446101&mm=1001318||,&filtersHidden=false&appliedHidden=false&autoApply=false&originalQueryURL=%2Fjsp%2Fsearch%2Fbrowse.jsp%3FN% 3D422%2B2203%2B200607%26Ntk%3Dgensearch%26Ntt%3Dfu se%2Bblock%26Ntx%3Dmode%2Bmatchallpartial%26displa ytext%3D%26isGoback%3Dfalse%26resultsPageURL%3D%2F jsp%2Fsearch%2Fresults.jsp%26isRedirect%3Dfalse%26 No%3D0%26getResults%3Dtrue%26appliedparametrics%3D true%26locale%3Den_US%26divisionLocale%3Den_US%26c atalogId%3D%26skipManufacturer%3Dfalse%26skipParam etricAttributeId%3D%26prevNValues%3D422%2B2203%2B2 00607

[Papa3[_2_]]

I really like these:

http://www.powerwerx.com/powerpole-power-distribution/rigrunner-4005h-horizontal.html






On Thursday, October 31, 2013 3:28:32 PM UTC-4, SF wrote:
> Terminal Strip with an integral mini blade style fuse.
>
>
>
> www.asi-ez.com
>
>
>
> Item: MF901GR, type MFPA.4 Screw clamp blade fuse terminal block gray.
>
> Item: PTC0400, push in bridge for 6mm terminal blocks, 42 positions.
>
>
>
> This terminal strip is larger than I really want it to be, but it is the smallest that I can find with integral fuses. Using integral fuses gives you an individual fuse on every load, lessens the number of connections, and reduces the behind the panel clutter.
>
>
>
> You have to reach your own decision as to the suitability of this for your glider. I'm not suggesting it, I'm merely responding to a request on an earlier thread to report what I found. This does not replace the need for a fuse on every battery as close as possible to the battery terminals.
>
>
>
> SF

[[email protected]]

On Friday, November 1, 2013 12:32:40 AM UTC+1, Dave Nadler wrote:
> Or these:
>
>
>
> http://www.digikey.com/product-detail/en/15600-08-21/283-3697-ND/1645038
>
>
>
> http://www.newark.com/jsp/search/browse.jsp?N=422+2203+200607+810319992&Ntk=gensearch&Ntt=fuse+block&Ntx=mode+matchallpartial&displaytext=&isGoback=false&resultsPageURL=/jsp/search/results.jsp&isRedirect=false&No=0&getResults=true&appliedparametrics=true&locale=en_US&divisionLocale=en_US&catalogId=&skipManufacturer=false&skipParametricAttributeId=&prevNValues=422+2203+200607+810319992+810446101&mm=1001318||,&filtersHidden=false&appliedHidden=false&autoApply=false&originalQueryURL=%2Fjsp%2Fsearch%2Fbrowse.jsp%3FN% 3D422%2B2203%2B200607%26Ntk%3Dgensearch%26Ntt%3Dfu se%2Bblock%26Ntx%3Dmode%2Bmatchallpartial%26displa ytext%3D%26isGoback%3Dfalse%26resultsPageURL%3D%2F jsp%2Fsearch%2Fresults.jsp%26isRedirect%3Dfalse%26 No%3D0%26getResults%3Dtrue%26appliedparametrics%3D true%26locale%3Den_US%26divisionLocale%3Den_US%26c atalogId%3D%26skipManufacturer%3Dfalse%26skipParam etricAttributeId%3D%26prevNValues%3D422%2B2203%2B2 00607

I have the second one lying around at home, looks good but it's pretty heavy.

[[email protected][_1_]]

+ 1 for Powerwerks RigRunner. Only downside is that it is a bit large. Other than that, a fantastic power distribution device.

[[email protected]]

The PC-8 from Eastern Beaver looks perfect. 8 ATM mini fused ports so you can start at 1 amp and go up. A bridge can be used from battery to PWR terminals so all 8 fuses are un-switched. I have not had one in my hands but intend to update over the winter.


http://www.easternbeaver.com/Main/Wiring_Kits/Fuseboxes/PC-8/pc-8.html#pc8only

[SF]

Guys, what I'm using is a small terminal strip with an integral fuse, not these honking big fuse blocks you guys are coming up with.

https://www.asi-ez.com/pix/doc/mf100gr.pdf#view=fitv