mike
October 20th 03, 02:55 PM
Older model but designed for the aviation industry.This box has seven
drawers on the front and six on the side w/two swinging doors on the
backside. Model is KR-562 and dimensions are 26.5" deep x 50" wide x 39.5"
H.
Not a cheap box, weighs in around 350lbs empty. Box also has a custom
butcher block top and mounted vise.see it here:
http://www.miketyler.net/toolbox/KR562.jpg
http://www.miketyler.net/toolbox/KR562c.jpg
Also have some aviation tools available as well. Will give the toolbox buyer
first option. Would prefer to sell all at once.Among which I have a rivet
shaver, a couple of angle drill motors 45 and 90 degree, a large chucked
angle drill, and large geared drill motor. Have a quantity of threaded drill
bits for the small head ange drill motors.
I also have a complete reamer set custom cut for every size hi-shear and
hi-loc fastener from 3/16 to 9/16 diameter including 1st, 2nd, and 3rd
oversizes. Also have various spot facers, reverse countersinks,
counterbores, drill bushings, etc. If you are into heavy structural repair
on big birds, this is sheet metal man's dream.
Additional pics available, looking for $1200 for the toolbox only. Pricing
for tools is negotiable. Shipping and delivery
available at additional charge. Box is located in Dallas. if interested
email me
Mike
atxguy at comcast dot net
drawers on the front and six on the side w/two swinging doors on the
backside. Model is KR-562 and dimensions are 26.5" deep x 50" wide x 39.5"
H.
Not a cheap box, weighs in around 350lbs empty. Box also has a custom
butcher block top and mounted vise.see it here:
http://www.miketyler.net/toolbox/KR562.jpg
http://www.miketyler.net/toolbox/KR562c.jpg
Also have some aviation tools available as well. Will give the toolbox buyer
first option. Would prefer to sell all at once.Among which I have a rivet
shaver, a couple of angle drill motors 45 and 90 degree, a large chucked
angle drill, and large geared drill motor. Have a quantity of threaded drill
bits for the small head ange drill motors.
I also have a complete reamer set custom cut for every size hi-shear and
hi-loc fastener from 3/16 to 9/16 diameter including 1st, 2nd, and 3rd
oversizes. Also have various spot facers, reverse countersinks,
counterbores, drill bushings, etc. If you are into heavy structural repair
on big birds, this is sheet metal man's dream.
Additional pics available, looking for $1200 for the toolbox only. Pricing
for tools is negotiable. Shipping and delivery
available at additional charge. Box is located in Dallas. if interested
email me
Mike
atxguy at comcast dot net