Oudie2 connection to LXnav V7

[John Docherty[_2_]]

I've connected my Oudie2 to LXnav V7 with cable supplied but no information
is transferred to the LXnav. I setup to receive data from PDA and have
checked menu on Oudie and V7 but still no data. Can anyone help.

[[email protected]]

On Wednesday, October 15, 2014 7:31:26 AM UTC-5, John Docherty wrote:
> I've connected my Oudie2 to LXnav V7 with cable supplied but no information
>
> is transferred to the LXnav. I setup to receive data from PDA and have
>
> checked menu on Oudie and V7 but still no data. Can anyone help.

On the Oudie in the Menu > Settings > Hardware screen
Device: LXNAV V7
GPS Forwarding: enabled
Use backup GPS: disabled (may not be necessary)

Port Settings
Com4, 115200

On the V7 in the Communications screen
GPS-PDA Link: disabled
Auto Baudrate: disabled
PDA Port baudrate: 115200
GPS port baudrate: 115200

[dbrunone]

If I'm not mistaken, you need a special cable to do this, I don't think the stock cable included with the Oudie will work. You need part CC-NP-Oudie http://www.cumulus-soaring.com/lxnav.htm#CC-NP-Oudie

[Naviter Info]

> GPS Forwarding: enabled
> Use backup GPS: disabled (may not be necessary)

This works if Oudie is to be used as your GPS source for the V7 and no other GPS is connected to the back of the V7.

If the GPS source for the V7 is an external GPS (Flarm, Nano, whatever) then these settings will work best:

GPS Forwarding: disabled (this is quite important)
Use backup GPS: enabled (not so important but backup is backup)

Regards,
Andrej Kolar
--
glider pilots use
http://www.naviter.com

On Wednesday, October 15, 2014 3:47:28 PM UTC+2, wrote:
> On Wednesday, October 15, 2014 7:31:26 AM UTC-5, John Docherty wrote:
>
> > I've connected my Oudie2 to LXnav V7 with cable supplied but no information
>
> >
>
> > is transferred to the LXnav. I setup to receive data from PDA and have
>
> >
>
> > checked menu on Oudie and V7 but still no data. Can anyone help.
>
>
>
> On the Oudie in the Menu > Settings > Hardware screen
>
> Device: LXNAV V7
>
> GPS Forwarding: enabled
>
> Use backup GPS: disabled (may not be necessary)
>
>
>
> Port Settings
>
> Com4, 115200
>
>
>
> On the V7 in the Communications screen
>
> GPS-PDA Link: disabled
>
> Auto Baudrate: disabled
>
> PDA Port baudrate: 115200
>
> GPS port baudrate: 115200

[Richard[_9_]]

On Wednesday, October 15, 2014 5:31:26 AM UTC-7, John Docherty wrote:
> I've connected my Oudie2 to LXnav V7 with cable supplied but no information
>
> is transferred to the LXnav. I setup to receive data from PDA and have
>
> checked menu on Oudie and V7 but still no data. Can anyone help.

Cable also available at

http://www.craggyaero.com/lxnav_varios.htm

Richard