My dog ate the list

[WhiteKnuckles]

Hi again all,
I asked for a listing of the Narco 11A pinouts and received same from one of
you gentlemen. Well, no bull****, my pit bull chewed it up before I was able
to make use of it. I understand that the 120A has the same pinout as the
11A, so if some one would take pity on me and resend this info I would be
much obliged. And yes, I did try to go back to the old posting, but it is no
longer on my computer. I assume I must have something set that deletes read
postings, but haven't figured out what and where.
Anyway, again thanks.
Jim Burns

[Rich S.]

"WhiteKnuckles" > wrote in message
...
> Hi again all,
> I asked for a listing of the Narco 11A pinouts and received same from one
of
> you gentlemen. Well, no bull****, my pit bull chewed it up before I was
able
> to make use of it. I understand that the 120A has the same pinout as the
> 11A, so if some one would take pity on me and resend this info I would be
> much obliged. And yes, I did try to go back to the old posting, but it is
no
> longer on my computer. I assume I must have something set that deletes
read
> postings, but haven't figured out what and where.
> Anyway, again thanks.
> Jim Burns

Jim................

Usenet postings are archived at www.google.com. Do a search for the keywords
in your post.

Good luck,
Rich S.

[Dino Shore]

>> Well, no bull****, my pit bull chewed it up before I wasable
>> to make use of it. I understand that the 120A has the same pinout as the
>> 11A, so if some one would take pity on me and resend this info I would be
>> much obliged. And yes, I did try to go back to the old posting, but it is
>no
>> longer on my computer. I assume I must have something set that deletes
>read
>> postings, but haven't figured out what and where.
>> Anyway, again thanks.
>> Jim Burns
>
>Jim................
>
>Usenet postings are archived at www.google.com. Do a search for the keywords
>in your post.
>
>Good luck,
>Rich S.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Whatz the odds the radio gets fried after spoonfeeding the info?


1 power ground
2 mic ground
3 phones
4 press to talk
5 speaker
6 speaker and phones ground
7 aux audio
8 low level audio
9 mic audio
10 dial lamps
11 intercom
12 switched something, may be Rt
13 +14v in
14 +14v in
15 not labelled.

[WhiteKnuckles]

Thanks, much,
Jim Burns
"Dino Shore" > wrote in message
...
>
> >> Well, no bull****, my pit bull chewed it up before I wasable
> >> to make use of it. I understand that the 120A has the same pinout as
the
> >> 11A, so if some one would take pity on me and resend this info I would
be
> >> much obliged. And yes, I did try to go back to the old posting, but it
is
> >no
> >> longer on my computer. I assume I must have something set that deletes
> >read
> >> postings, but haven't figured out what and where.
> >> Anyway, again thanks.
> >> Jim Burns
> >
> >Jim................
> >
> >Usenet postings are archived at www.google.com. Do a search for the
keywords
> >in your post.
> >
> >Good luck,
> >Rich S.
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
> Whatz the odds the radio gets fried after spoonfeeding the info?
>
>
> 1 power ground
> 2 mic ground
> 3 phones
> 4 press to talk
> 5 speaker
> 6 speaker and phones ground
> 7 aux audio
> 8 low level audio
> 9 mic audio
> 10 dial lamps
> 11 intercom
> 12 switched something, may be Rt
> 13 +14v in
> 14 +14v in
> 15 not labelled.