Reversers question please

[Dudley Henriques]

When you assign thrust reversers for an add on like the Lago Tornado to a
controller switch, say a two position rocker or slide switch, I understand
that F1 (decrease throttle) and F2 (cut throttle) are used for this, but
should you use the sliders in the sim settings for these two functions or
should one or both of these functions remain a toggle (no slider)? I've
tried it several ways and am getting mixed results. It seems to function
best with a slider to the right for F1 and no slider selected in the
settings for the F2. Is this right?
Thanks much,
Dudley

[Dave M]

I have button assigned to the f2 and had better luck with the slider 1/2 or
better. I think you would want the higher repeat rate to fully engage thrust
reversers.
can't honestly say about using the f1 as this.
"Dudley Henriques" > wrote in message
ink.net...
> When you assign thrust reversers for an add on like the Lago Tornado to a
> controller switch, say a two position rocker or slide switch, I understand
> that F1 (decrease throttle) and F2 (cut throttle) are used for this, but
> should you use the sliders in the sim settings for these two functions or
> should one or both of these functions remain a toggle (no slider)? I've
> tried it several ways and am getting mixed results. It seems to function
> best with a slider to the right for F1 and no slider selected in the
> settings for the F2. Is this right?
> Thanks much,
> Dudley
>
>




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

[Dudley Henriques]

Thanks Dave.
D
"Dave M" > wrote in message
...
> I have button assigned to the f2 and had better luck with the slider 1/2
or
> better. I think you would want the higher repeat rate to fully engage
thrust
> reversers.
> can't honestly say about using the f1 as this.
> "Dudley Henriques" > wrote in message
> ink.net...
> > When you assign thrust reversers for an add on like the Lago Tornado to
a
> > controller switch, say a two position rocker or slide switch, I
understand
> > that F1 (decrease throttle) and F2 (cut throttle) are used for this, but
> > should you use the sliders in the sim settings for these two functions
or
> > should one or both of these functions remain a toggle (no slider)? I've
> > tried it several ways and am getting mixed results. It seems to function
> > best with a slider to the right for F1 and no slider selected in the
> > settings for the F2. Is this right?
> > Thanks much,
> > Dudley
> >
> >
>
>
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 80,000 Newsgroups - 16 Different Servers! =-----