ILEC SN10 version 2.40 release

[Dave Nadler]

Hi All - Version 2.40 is now released, now including airspace warnings.
Thanks to all of you that helped with review and testing.
Please read the release notes carefully!

A big thanks to John Leibacher, who rebuilt the airspace portions
of NDB files on the world-wide turnpoint exchange to better support
the SN10 airspace warning feature. Grab your updated NDB file here:
http://soaringweb.org/TP
Thanks again John!

Special thanks to Billy, Lynn, and Roger for flight-test during winter
months when I was unable (Boston weather has been challenging).

Download here:
http://www.nadler.com/sn10/SN10_Resource_Index.html, or
http://www.ilec-gmbh.com/downloads_sw_en.html

Hope to see many of you shortly at the Seniors!
Enjoy,
Best Regards, Dave

[Sean Fidler]

Fantastic! Thanks!!!!!

[[email protected]]

The weather in Southern California has been wonderful. 80 degrees today in San Diego!

Oh, thanks Dave for all you do!

On Friday, February 27, 2015 at 3:05:48 PM UTC-8, Dave Nadler wrote:
> Hi All - Version 2.40 is now released, now including airspace warnings.
> Thanks to all of you that helped with review and testing.
> Please read the release notes carefully!
>
> A big thanks to John Leibacher, who rebuilt the airspace portions
> of NDB files on the world-wide turnpoint exchange to better support
> the SN10 airspace warning feature. Grab your updated NDB file here:
> http://soaringweb.org/TP
> Thanks again John!
>
> Special thanks to Billy, Lynn, and Roger for flight-test during winter
> months when I was unable (Boston weather has been challenging).
>
> Download here:
> http://www.nadler.com/sn10/SN10_Resource_Index.html, or
> http://www.ilec-gmbh.com/downloads_sw_en.html
>
> Hope to see many of you shortly at the Seniors!
> Enjoy,
> Best Regards, Dave

[Sean Fidler]

Thanks Dave. Looks great!

[G Carter]

I've downloaded the hex file like previous updates (SN10B.HEX)to the root of my thumb drive. When I attach it to my adaptor, my SN10B sees the software download, but it will not install it. The program just sits there with Software Loading ... on the screen. I've tried loading it using other thumb drives. In each case it sees it, but will not install it. I've upgraded my box a couple of times, so I think I know what i'm doing. Any advice. By the way, I got the hex file from the ZIP file of all the different software. My SN10B currently has 2.37 on it.

Thanks for any help you can give me.

[Wheaton]

Had a similar experience, but eventually got it to work by restarting the pc. Might have been a serial port issue. With the computer it showed a serial port error. Try loading a ndb waypoint file. It does work.