June 20th 15, 06:12 PM
Rob,
Maybe you have the same email after many years....
Also maybe you obtained RS232 protocol from Becker. May you help me with it?
BR,
Costin
miercuri, 18 martie 1998, 10:00:00 UTC+2, Robert Acker a scris:
> > Robert, I have a 4201 and I think you may have been mislead. It does
> > have a 25 pin D-sub connector, but it is not rs-232 controlled. The
> > connector is only for "normal" radio hook-ups; i.e. mic, ptt,
> > speaker, etc. I don't have the manual in front of me, but I don't
> > think there any "remote" functions.
> > It can handle multiple i-com sets, however. It's just a matter of
>
> Thanks for the reply Tim!
>
> I found this on Becker's website (www.becker-avionics.com): "Using the
> RS-232 interface, all functions can be remotely operated. With this
> standard feature the AR4201 can be easily integrated in future BECKER
> avionic products."
>
> Can anybody verify by checking their manual? I've e-mailed Becker twice
> with no reply (which unfortunately does not give me a lot of faith in their
> customer support).
>
> Rob.
Maybe you have the same email after many years....
Also maybe you obtained RS232 protocol from Becker. May you help me with it?
BR,
Costin
miercuri, 18 martie 1998, 10:00:00 UTC+2, Robert Acker a scris:
> > Robert, I have a 4201 and I think you may have been mislead. It does
> > have a 25 pin D-sub connector, but it is not rs-232 controlled. The
> > connector is only for "normal" radio hook-ups; i.e. mic, ptt,
> > speaker, etc. I don't have the manual in front of me, but I don't
> > think there any "remote" functions.
> > It can handle multiple i-com sets, however. It's just a matter of
>
> Thanks for the reply Tim!
>
> I found this on Becker's website (www.becker-avionics.com): "Using the
> RS-232 interface, all functions can be remotely operated. With this
> standard feature the AR4201 can be easily integrated in future BECKER
> avionic products."
>
> Can anybody verify by checking their manual? I've e-mailed Becker twice
> with no reply (which unfortunately does not give me a lot of faith in their
> customer support).
>
> Rob.