UK2 XS709 DH DominieT1 1965 BoscombeDown PhilButlerColl.jpg

[Joseph Testagrose]

[Jess Lurkin[_10_]]

Joseph Testagrose > wrote in
:

>
> begin 644 UK2 XS709 DH DominieT1 1965 BoscombeDown PhilButlerColl.jpg
>
> Attachment decoded: UK2 XS709 DH DominieT1 1965 BoscombeDown
> PhilButlerColl.jpg `
> end




Any clues or guesses as to what's going on here?

[john szalay]

Jess Lurkin > wrote in :

> Joseph Testagrose > wrote in
> :
>
>>
>> begin 644 UK2 XS709 DH DominieT1 1965 BoscombeDown PhilButlerColl.jpg
>>
>> Attachment decoded: UK2 XS709 DH DominieT1 1965 BoscombeDown
>> PhilButlerColl.jpg `
>> end
>
>
>
>
> Any clues or guesses as to what's going on here?
>



http://www.qinetiq.com/services-products/air/documents/blower-tunnel-
facility.pdf

[Dave Kearton[_4_]]

"Jess Lurkin" wrote in message ...

Joseph Testagrose > wrote in
:

>
> begin 644 UK2 XS709 DH DominieT1 1965 BoscombeDown PhilButlerColl.jpg
>
> Attachment decoded: UK2 XS709 DH DominieT1 1965 BoscombeDown
> PhilButlerColl.jpg `
> end




> Any clues or guesses as to what's going on here?




No idea, but when it finally gives birth, the litter isn't going to be
pretty.









Cheers

Dave Kearton

[[email protected]]

I get a 404 error on that link. When I try to go directly to documents it
requires a user name and password. Any ideas?

[Savageduck[_3_]]

On 2015-11-22 18:11:14 +0000, said:

> I get a 404 error on that link. When I try to go directly to documents it
> requires a user name and password. Any ideas?

The link might have been broken on your reader. If handled as a broken
link it gets you to the pdf.
The important thing when posting long URLs is to use the URL
delimiters. So try this:
<http://www.qinetiq.com/services-products/air/documents/blower-tunnel-facility.pdf>

--


Regards,

Savageduck

[john szalay]

wrote in :

> I get a 404 error on that link. When I try to go directly to
> documents it requires a user name and password. Any ideas?

with the link not wraping properly, you will get a 404, put all of that on
one line, and it should work.

As I see it, its an open air wind tunnel, and the way the aircraft is
postioned , up with the gear down, appears they are testing the gear & door
against high wind speeds.

thats my 2¢

[[email protected]]

Thanks for the corrected link. I had tried copying and pasting the whole
link only to get the user/pw screen.

[john szalay]

wrote in :

> Thanks for the corrected link. I had tried copying and pasting the whole
> link only to get the user/pw screen.

this is the first page of that PDF, about the open air wind tunnel ..