Wedekind Sleeves for Cam Style Hotelliers??

[Peter Deane[_2_]]

All

Hoping for some help here - My Std Cirrus has cam style hotellier fittings and I havent been able to find a wedekind sleeve that works with these rather than the vertical plunger style..

Any clues for finding sleeves for these?

Thanks in advance

Peter Deane, Std Cirrus 5T

[[email protected]]

As far as I know Wedekind sleeves only work on the straight up and down plunger type L'Hotellier couplings, not on the rotating cam style ones.

[shkdriver]

On Monday, March 7, 2016 at 7:23:24 PM UTC-6, Peter Deane wrote:
> All
>
> Hoping for some help here.


I just bought #538 and the sleeves are installed, interestingly, the old cam hotelier ends were in the gear/tool box, having been replaced with "plunger style" to allow installation of the wedekind sleeves.

Scott.

[Peter Deane[_2_]]

Scott - Thanks - thats what I was afraid of having to do but now looks like no other alternative...

Cheers

5T

[[email protected]]

On Tuesday, March 8, 2016 at 8:44:39 PM UTC-8, Peter Deane wrote:
> Scott - Thanks - thats what I was afraid of having to do but now looks like no other alternative...
>
> Cheers
>
> 5T

Actually, Peter, now that the daughter is a whiz at designing and 3D printing plastic thingies, I've been thinking about what sort of snap-on plastic device would allow us to avoid having to replace the fiendish cam-style fittings ;^)

Marc (the other half of 5T)