MM Fabrication Wing Wheel

[Andrzej Kobus]

I just received a wing wheel for my new glider from MM Fabrication. I did not check for fit yet, but I have to say I am impressed with the build quality.

When I was about to make a decision which wing wheel to buy I looked for information here and I did not find much. This is the reason I am posting this note.

Andrzej

[Steve Leonard[_2_]]

A "second" for MM Fabrication wing wheels. Mark built one for the FJ-1. Quality and fit is fabulous.

And in case you are wondering, the FJ-1 (From the January and February 2016 issues of SOARING) is alive and well and living in Kansas. I am adding pictures, but here is a bit more history on the bird.

https://picasaweb.google.com/115961928359530256891/FJ1

Steve Leonard

[[email protected]]

Ditto on Mark Mocho and MM Fabrication. Mark has built wing wheels and tow bars for me over the years for 4 different gliders and they all fit perfectly and have worked flawlessly. Almost every glider at Moriarty uses Mark's wing wheels and tow bars and his products do really perform and are highly recommended!
Thx - Renny

[Richard[_9_]]

On Wednesday, March 9, 2016 at 5:24:52 PM UTC-8, Andrzej Kobus wrote:
> I just received a wing wheel for my new glider from MM Fabrication. I did not check for fit yet, but I have to say I am impressed with the build quality.
>
> When I was about to make a decision which wing wheel to buy I looked for information here and I did not find much. This is the reason I am posting this note.
>
> Andrzej

Have both the wing wheel and tow bar for my Ventus.

Great stuff

Richard
www.craggyaero.com

[WAVEGURU]

The least we can do is provide a link.

http://www.mmfabrication.com

Boggs

[SF]

MM Fabrication's booth was next to our club booth at the 2016 SSA Convention, so I spent some quality time looking at their finished products over the three days of the convention. Fantastic design & build quality, I'll call them the next time I need a wing wheel. That may not be too long, my current wing wheel is an SF mod #4 of the original Udo fabricated wing wheel that came with the airplane when I bought it. So far, towing the glider a mile down the runway at a contest with the wings full of water for a week or two, has painfully revealed various previously undiscovered design flaws in the Udo & SF design.

SF

[glidergreg]

On Wednesday, March 9, 2016 at 7:24:52 PM UTC-6, Andrzej Kobus wrote:
> I just received a wing wheel for my new glider from MM Fabrication. I did not check for fit yet, but I have to say I am impressed with the build quality.
>
> When I was about to make a decision which wing wheel to buy I looked for information here and I did not find much. This is the reason I am posting this note.
>
> Andrzej

While visiting the field that MM operates out of in 2014, Mark personally made a template of the wing of my DG-300, after checking and trimming the fit twice, he fabricated a beautiful custom fit wing wheel for my ship. His work is first class. I also have the tow bar from MM. If you visit his place make time to have a cold beer from the local brewery with him. Two ailerons up for Mark.