Re: Free TE probes

[[email protected]]

It looks like I'll finish this batch a bit ahead of schedule. If I can finish making and adding the shank fittings this weekend I will start mailing them out Monday 28 November.

It also looks like I might have one left over--when I make parts like this I always kit out one or two extra assemblies in case I mess up one of the fabrication steps. But at this point I have plus one wands and plus two each 6mm and 8mm shanks. So I'll probably put the extra up on eBay and see what the market bears.

--Bob K.

[Michael Opitz]

At 21:18 22 November 2016, wrote:
>It looks like I'll finish this batch a bit ahead of schedule. If I can
>fini=
>sh making and adding the shank fittings this weekend I will start
mailing
>t=
>hem out Monday 28 November.=20
>
>It also looks like I might have one left over--when I make parts like
this
>=
>I always kit out one or two extra assemblies in case I mess up one of
the
>f=
>abrication steps. But at this point I have plus one wands and plus
two
>each=
> 6mm and 8mm shanks. So I'll probably put the extra up on eBay and
see
>what=
> the market bears.
>
>--Bob K.
>

Please let us know how it's listed so we can find it on eBay..

RO