Looking for a 1-man wing rigger for a DG-1000

[Heinz Gehlhaar]

I will be looking for a 1-man wing rigger for a DG-1000 at the SSA-Convention. Ours (it seems to be a standard DG rigger) appears to be to weak for the heavy DG wings. The linear roller-bearings have bent, and the balls are falling out. Also, when the wings are flat (in flight config), the rigger-upright is either leaning to the right or left because of wing-holder flexing..
Heinz Gehlhaar

[[email protected]]

Come by my booth (MM Fabrication LLC) and talk to me.

[JS[_5_]]

On Saturday, January 27, 2018 at 11:26:56 PM UTC-8, Heinz Gehlhaar wrote:
> I will be looking for a 1-man wing rigger for a DG-1000 at the SSA-Convention. Ours (it seems to be a standard DG rigger) appears to be to weak for the heavy DG wings. The linear roller-bearings have bent, and the balls are falling out. Also, when the wings are flat (in flight config), the rigger-upright is either leaning to the right or left because of wing-holder flexing.
> Heinz Gehlhaar

Hello Heinz:
I have a Cobra electric rigger for Duo Discus and similar listed on glider source (below) and can deliver it to the SSA convention in Reno.
Jim
http://www.glidersource.com/cgi-bin/post.cgi?id=1218