TJ
July 9th 04, 09:21 PM
Hi,
I have a Terra 760 that doesn't work.
(Long story if you want to hear it.)
(1) Any idea who fixes these things?
(2) Any suggestions as to problem:
(The LED numbers aren't showning up
as nice distinct numbers. They look
like strike overs and it is hard to
tell if what the frequency is. There
is no sound. Turning volume up and
playing with the sq. and you get no
noise from the speaker (speaker is ok,
I tested it.) It seems to transmit still.
(3) I am going to have to install a older Edo-aire
RT-551A, but I've forgotten the pin out.
Pin 1 appears to be ground (negative)
Pin 15 appears to be positive
Pins 12 and 13 appear to be the mike plug
Pin 6 is ????? (Yellow wire coming out of it)
Pins for speaker ?????
HELP! Am I correct?
Also, while I'm on a "roll"....Does anyone have
a manual for a Bleumineaur (spelling). Older
instrument that runs three heads (one vario, one
something else and one something else).
Thanks!
Thomas
or call 503.638.0384
I have a Terra 760 that doesn't work.
(Long story if you want to hear it.)
(1) Any idea who fixes these things?
(2) Any suggestions as to problem:
(The LED numbers aren't showning up
as nice distinct numbers. They look
like strike overs and it is hard to
tell if what the frequency is. There
is no sound. Turning volume up and
playing with the sq. and you get no
noise from the speaker (speaker is ok,
I tested it.) It seems to transmit still.
(3) I am going to have to install a older Edo-aire
RT-551A, but I've forgotten the pin out.
Pin 1 appears to be ground (negative)
Pin 15 appears to be positive
Pins 12 and 13 appear to be the mike plug
Pin 6 is ????? (Yellow wire coming out of it)
Pins for speaker ?????
HELP! Am I correct?
Also, while I'm on a "roll"....Does anyone have
a manual for a Bleumineaur (spelling). Older
instrument that runs three heads (one vario, one
something else and one something else).
Thanks!
Thomas
or call 503.638.0384