WTB: McCreedy speed ring

[Slick]

Does anyone know where I can get a speed ring for a Grob-102 club? I'd
rather have a manufactured one than make my own.




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

[Paul Remde]

Hi,

What vario are you mounting the speed ring on? Winter can provide an
extremely nice one that will fit onto a Winter vario. The lead-time is
about 3 weeks.

I'm in the process of creating my Winter products web page. It will be
available in a few days. I could order the ring for you along with my first
stocking order.

Good Soaring,

Paul Remde
Cumulus Soaring, Inc.
http://www.cumulus-soaring.com

"Slick" > wrote in message
...
> Does anyone know where I can get a speed ring for a Grob-102 club? I'd
> rather have a manufactured one than make my own.
>
>
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----

[Slick]

what would the cost be? We have a Winter in there as well as an electronic
vario, I would have to go to the field to find out what the manufacturer of
that is.
"Paul Remde" > wrote in message
news:LgRHc.62232$Oq2.6300@attbi_s52...
> Hi,
>
> What vario are you mounting the speed ring on? Winter can provide an
> extremely nice one that will fit onto a Winter vario. The lead-time is
> about 3 weeks.
>
> I'm in the process of creating my Winter products web page. It will be
> available in a few days. I could order the ring for you along with my
first
> stocking order.
>
> Good Soaring,
>
> Paul Remde
> Cumulus Soaring, Inc.
> http://www.cumulus-soaring.com
>
> "Slick" > wrote in message
> ...
> > Does anyone know where I can get a speed ring for a Grob-102 club? I'd
> > rather have a manufactured one than make my own.
> >
> >
> >
> >
> > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
>
>




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

[Paul Remde]

Hi,

I'm in the process of creating my Winter products web site right now. You
can view the preliminary page at:
http://www.cumulus-soaring.com/winter.htm I have added the speed rings to
the web page but the rest of the data is preliminary.

Thank you,

Paul Remde
Cumulus Soaring, Inc.
http://www.cumulus-soaring.com

"Slick" > wrote in message
...
> what would the cost be? We have a Winter in there as well as an electronic
> vario, I would have to go to the field to find out what the manufacturer
of
> that is.
> "Paul Remde" > wrote in message
> news:LgRHc.62232$Oq2.6300@attbi_s52...
> > Hi,
> >
> > What vario are you mounting the speed ring on? Winter can provide an
> > extremely nice one that will fit onto a Winter vario. The lead-time is
> > about 3 weeks.
> >
> > I'm in the process of creating my Winter products web page. It will be
> > available in a few days. I could order the ring for you along with my
> first
> > stocking order.
> >
> > Good Soaring,
> >
> > Paul Remde
> > Cumulus Soaring, Inc.
> > http://www.cumulus-soaring.com
> >
> > "Slick" > wrote in message
> > ...
> > > Does anyone know where I can get a speed ring for a Grob-102 club? I'd
> > > rather have a manufactured one than make my own.
> > >
> > >
> > >
> > >
> > > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > > -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> >
> >
>
>
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----

[Tim Mara]

you can also find more detailed and more "correct" information on Winter
Instruments on Wings & Wheels website pages
http://www.wingsandwheels.com/page21.htm
http://www.wingsandwheels.com/page19.htm etc etc
this is where Paul has apparently copied most of his information and prices
(cutting a few by $5.00 or so for the obvious)
I by the way have 99% of what is listed on my website "In Stock" at all
times so you won't have to place orders and wait several weeks for
delivery........
BTW, I also cannot make claims to deliver in 3 weeks special orders from
Winter ......Winter is a wonderful company who has supplied quality
instruments to the sailplane manufacturers and owners for decades......they
are however nearly all hand made instruments (I've visited the manufacturer
and seen for myself) and special order delivery times can run sometimes as
long as 10-12 weeks.
My most recent delivery was for reference, delivered here yesterday on an
order placed on June 8th.
sorry to be spamming this group..I said I wouldn't do it and I do try not to
but after seeing Paul's 3rd or 4th posting of this same message I feel
justified (this time)
Respectfully
Tim Mara
www.wingsandwheels.com


"Paul Remde" > wrote in message
news:d_IIc.77999$Oq2.44875@attbi_s52...
> Hi,
>
> I'm in the process of creating my Winter products web site right now. You
> can view the preliminary page at:
> http://www.cumulus-soaring.com/winter.htm I have added the speed rings to
> the web page but the rest of the data is preliminary.
>
> Thank you,
>
> Paul Remde
> Cumulus Soaring, Inc.
> http://www.cumulus-soaring.com
>
> "Slick" > wrote in message
> ...
> > what would the cost be? We have a Winter in there as well as an
electronic
> > vario, I would have to go to the field to find out what the manufacturer
> of
> > that is.
> > "Paul Remde" > wrote in message
> > news:LgRHc.62232$Oq2.6300@attbi_s52...
> > > Hi,
> > >
> > > What vario are you mounting the speed ring on? Winter can provide an
> > > extremely nice one that will fit onto a Winter vario. The lead-time
is
> > > about 3 weeks.
> > >
> > > I'm in the process of creating my Winter products web page. It will
be
> > > available in a few days. I could order the ring for you along with my
> > first
> > > stocking order.
> > >
> > > Good Soaring,
> > >
> > > Paul Remde
> > > Cumulus Soaring, Inc.
> > > http://www.cumulus-soaring.com
> > >
> > > "Slick" > wrote in message
> > > ...
> > > > Does anyone know where I can get a speed ring for a Grob-102 club?
I'd
> > > > rather have a manufactured one than make my own.
> > > >
> > > >
> > > >
> > > >
> > > > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > > > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > > > -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> > >
> > >
> >
> >
> >
> >
> > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
>
>

[Paul Remde]

Hi Tim,

You light jabs at my prototype web site are understandable and taken as from
a friendly competitor. I am certainly impressed with your web site for
many reasons. I've looked very closely at web sites from many vendors
around the world - not just yours. Certainly I keep an eye on the
competition and try to make sure my prices are in line with yours and those
of other vendors in the US. If my prices are lower than yours it is a
mistake. We don't make enough on these products to price them low. You and
all customers reading this can expect my prices to be extremely similar to
yours. Your statement below that I cut $5 or so from the prices "for the
obvious" is not correct. I must have put a few prices on the page
incorrectly - it is prototype page that was created before I received the
price list from Winter. I hope to get the page completed and corrected in a
few days. My goal is that the page will provide a lot of detailed
information on all the options and accessories available from Winter. I try
to add value in that way. I have been surprised at how little detailed
information is available on the Winter products.

The reason the lead-times listed on my Winter site are somewhat optimistic
is because it is a prototype web site that is not yet connected to my main
web site. Also, I'm sure I have a bit to learn about how long it takes
Winter to deliver products - especially custom made speed rings, etc.

I have always heard that you have a lot of instruments and other items in
stock and I applaud you for it. I am currently making major investments in
stock for my company and will have a large number of instruments in stock
soon from a wide variety of manufacturers. I will also be updating my
"Example Systems" web pages with more examples as my list of approved
vendors increases.

I hope we can have a friendly competitive relationship going forward.

Good Soaring,

Paul Remde
Cumulus Soaring, Inc.
http://www.cumulus-soaring.com

"Tim Mara" > wrote in message
...
> you can also find more detailed and more "correct" information on Winter
> Instruments on Wings & Wheels website pages
> http://www.wingsandwheels.com/page21.htm
> http://www.wingsandwheels.com/page19.htm etc etc
> this is where Paul has apparently copied most of his information and
prices
> (cutting a few by $5.00 or so for the obvious)
> I by the way have 99% of what is listed on my website "In Stock" at all
> times so you won't have to place orders and wait several weeks for
> delivery........
> BTW, I also cannot make claims to deliver in 3 weeks special orders from
> Winter ......Winter is a wonderful company who has supplied quality
> instruments to the sailplane manufacturers and owners for
decades......they
> are however nearly all hand made instruments (I've visited the
manufacturer
> and seen for myself) and special order delivery times can run sometimes
as
> long as 10-12 weeks.
> My most recent delivery was for reference, delivered here yesterday on an
> order placed on June 8th.
> sorry to be spamming this group..I said I wouldn't do it and I do try not
to
> but after seeing Paul's 3rd or 4th posting of this same message I feel
> justified (this time)
> Respectfully
> Tim Mara
> www.wingsandwheels.com
>
>
> "Paul Remde" > wrote in message
> news:d_IIc.77999$Oq2.44875@attbi_s52...
> > Hi,
> >
> > I'm in the process of creating my Winter products web site right now.
You
> > can view the preliminary page at:
> > http://www.cumulus-soaring.com/winter.htm I have added the speed rings
to
> > the web page but the rest of the data is preliminary.
> >
> > Thank you,
> >
> > Paul Remde
> > Cumulus Soaring, Inc.
> > http://www.cumulus-soaring.com
> >
> > "Slick" > wrote in message
> > ...
> > > what would the cost be? We have a Winter in there as well as an
> electronic
> > > vario, I would have to go to the field to find out what the
manufacturer
> > of
> > > that is.
> > > "Paul Remde" > wrote in message
> > > news:LgRHc.62232$Oq2.6300@attbi_s52...
> > > > Hi,
> > > >
> > > > What vario are you mounting the speed ring on? Winter can provide
an
> > > > extremely nice one that will fit onto a Winter vario. The
lead-time
> is
> > > > about 3 weeks.
> > > >
> > > > I'm in the process of creating my Winter products web page. It will
> be
> > > > available in a few days. I could order the ring for you along with
my
> > > first
> > > > stocking order.
> > > >
> > > > Good Soaring,
> > > >
> > > > Paul Remde
> > > > Cumulus Soaring, Inc.
> > > > http://www.cumulus-soaring.com
> > > >
> > > > "Slick" > wrote in message
> > > > ...
> > > > > Does anyone know where I can get a speed ring for a Grob-102 club?
> I'd
> > > > > rather have a manufactured one than make my own.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > > > > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > > > > -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> > > >
> > > >
> > >
> > >
> > >
> > >
> > > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > > -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> >
> >
>
>
>

[Slick]

Please don't start a flame war on an open news group, especially not on a
thread I started. Just email him to let him know about your discrepancy. I'd
email you, but you have not responded to my first email.
"Paul Remde" > wrote in message
news:dvzJc.97863$Oq2.96750@attbi_s52...
> Hi Tim,
>
> You light jabs at my prototype web site are understandable and taken as
from
> a friendly competitor. I am certainly impressed with your web site for
> many reasons. I've looked very closely at web sites from many vendors
> around the world - not just yours. Certainly I keep an eye on the
> competition and try to make sure my prices are in line with yours and
those
> of other vendors in the US. If my prices are lower than yours it is a
> mistake. We don't make enough on these products to price them low. You
and
> all customers reading this can expect my prices to be extremely similar to
> yours. Your statement below that I cut $5 or so from the prices "for the
> obvious" is not correct. I must have put a few prices on the page
> incorrectly - it is prototype page that was created before I received the
> price list from Winter. I hope to get the page completed and corrected in
a
> few days. My goal is that the page will provide a lot of detailed
> information on all the options and accessories available from Winter. I
try
> to add value in that way. I have been surprised at how little detailed
> information is available on the Winter products.
>
> The reason the lead-times listed on my Winter site are somewhat optimistic
> is because it is a prototype web site that is not yet connected to my main
> web site. Also, I'm sure I have a bit to learn about how long it takes
> Winter to deliver products - especially custom made speed rings, etc.
>
> I have always heard that you have a lot of instruments and other items in
> stock and I applaud you for it. I am currently making major investments
in
> stock for my company and will have a large number of instruments in stock
> soon from a wide variety of manufacturers. I will also be updating my
> "Example Systems" web pages with more examples as my list of approved
> vendors increases.
>
> I hope we can have a friendly competitive relationship going forward.
>
> Good Soaring,
>
> Paul Remde
> Cumulus Soaring, Inc.
> http://www.cumulus-soaring.com
>
> "Tim Mara" > wrote in message
> ...
> > you can also find more detailed and more "correct" information on Winter
> > Instruments on Wings & Wheels website pages
> > http://www.wingsandwheels.com/page21.htm
> > http://www.wingsandwheels.com/page19.htm etc etc
> > this is where Paul has apparently copied most of his information and
> prices
> > (cutting a few by $5.00 or so for the obvious)
> > I by the way have 99% of what is listed on my website "In Stock" at all
> > times so you won't have to place orders and wait several weeks for
> > delivery........
> > BTW, I also cannot make claims to deliver in 3 weeks special orders from
> > Winter ......Winter is a wonderful company who has supplied quality
> > instruments to the sailplane manufacturers and owners for
> decades......they
> > are however nearly all hand made instruments (I've visited the
> manufacturer
> > and seen for myself) and special order delivery times can run sometimes
> as
> > long as 10-12 weeks.
> > My most recent delivery was for reference, delivered here yesterday on
an
> > order placed on June 8th.
> > sorry to be spamming this group..I said I wouldn't do it and I do try
not
> to
> > but after seeing Paul's 3rd or 4th posting of this same message I feel
> > justified (this time)
> > Respectfully
> > Tim Mara
> > www.wingsandwheels.com
> >
> >
> > "Paul Remde" > wrote in message
> > news:d_IIc.77999$Oq2.44875@attbi_s52...
> > > Hi,
> > >
> > > I'm in the process of creating my Winter products web site right now.
> You
> > > can view the preliminary page at:
> > > http://www.cumulus-soaring.com/winter.htm I have added the speed
rings
> to
> > > the web page but the rest of the data is preliminary.
> > >
> > > Thank you,
> > >
> > > Paul Remde
> > > Cumulus Soaring, Inc.
> > > http://www.cumulus-soaring.com
> > >
> > > "Slick" > wrote in message
> > > ...
> > > > what would the cost be? We have a Winter in there as well as an
> > electronic
> > > > vario, I would have to go to the field to find out what the
> manufacturer
> > > of
> > > > that is.
> > > > "Paul Remde" > wrote in message
> > > > news:LgRHc.62232$Oq2.6300@attbi_s52...
> > > > > Hi,
> > > > >
> > > > > What vario are you mounting the speed ring on? Winter can provide
> an
> > > > > extremely nice one that will fit onto a Winter vario. The
> lead-time
> > is
> > > > > about 3 weeks.
> > > > >
> > > > > I'm in the process of creating my Winter products web page. It
will
> > be
> > > > > available in a few days. I could order the ring for you along
with
> my
> > > > first
> > > > > stocking order.
> > > > >
> > > > > Good Soaring,
> > > > >
> > > > > Paul Remde
> > > > > Cumulus Soaring, Inc.
> > > > > http://www.cumulus-soaring.com
> > > > >
> > > > > "Slick" > wrote in message
> > > > > ...
> > > > > > Does anyone know where I can get a speed ring for a Grob-102
club?
> > I'd
> > > > > > rather have a manufactured one than make my own.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > > > > > http://www.newsfeeds.com - The #1 Newsgroup Service in the
World!
> > > > > > -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > > > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > > > -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> > >
> > >
> >
> >
> >
>
>




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

[Paul Remde]

Hi,

I'm confused. What first e-mail? I don't know your name, but I think I'm
caught up on all the e-mails in my inbox.

Paul Remde

"Slick" > wrote in message
...
> Please don't start a flame war on an open news group, especially not on a
> thread I started. Just email him to let him know about your discrepancy.
I'd
> email you, but you have not responded to my first email.
> "Paul Remde" > wrote in message
> news:dvzJc.97863$Oq2.96750@attbi_s52...
> > Hi Tim,
> >
> > You light jabs at my prototype web site are understandable and taken as
> from
> > a friendly competitor. I am certainly impressed with your web site
for
> > many reasons. I've looked very closely at web sites from many vendors
> > around the world - not just yours. Certainly I keep an eye on the
> > competition and try to make sure my prices are in line with yours and
> those
> > of other vendors in the US. If my prices are lower than yours it is a
> > mistake. We don't make enough on these products to price them low. You
> and
> > all customers reading this can expect my prices to be extremely similar
to
> > yours. Your statement below that I cut $5 or so from the prices "for
the
> > obvious" is not correct. I must have put a few prices on the page
> > incorrectly - it is prototype page that was created before I received
the
> > price list from Winter. I hope to get the page completed and corrected
in
> a
> > few days. My goal is that the page will provide a lot of detailed
> > information on all the options and accessories available from Winter. I
> try
> > to add value in that way. I have been surprised at how little detailed
> > information is available on the Winter products.
> >
> > The reason the lead-times listed on my Winter site are somewhat
optimistic
> > is because it is a prototype web site that is not yet connected to my
main
> > web site. Also, I'm sure I have a bit to learn about how long it takes
> > Winter to deliver products - especially custom made speed rings, etc.
> >
> > I have always heard that you have a lot of instruments and other items
in
> > stock and I applaud you for it. I am currently making major investments
> in
> > stock for my company and will have a large number of instruments in
stock
> > soon from a wide variety of manufacturers. I will also be updating my
> > "Example Systems" web pages with more examples as my list of approved
> > vendors increases.
> >
> > I hope we can have a friendly competitive relationship going forward.
> >
> > Good Soaring,
> >
> > Paul Remde
> > Cumulus Soaring, Inc.
> > http://www.cumulus-soaring.com
> >
> > "Tim Mara" > wrote in message
> > ...
> > > you can also find more detailed and more "correct" information on
Winter
> > > Instruments on Wings & Wheels website pages
> > > http://www.wingsandwheels.com/page21.htm
> > > http://www.wingsandwheels.com/page19.htm etc etc
> > > this is where Paul has apparently copied most of his information and
> > prices
> > > (cutting a few by $5.00 or so for the obvious)
> > > I by the way have 99% of what is listed on my website "In Stock" at
all
> > > times so you won't have to place orders and wait several weeks for
> > > delivery........
> > > BTW, I also cannot make claims to deliver in 3 weeks special orders
from
> > > Winter ......Winter is a wonderful company who has supplied quality
> > > instruments to the sailplane manufacturers and owners for
> > decades......they
> > > are however nearly all hand made instruments (I've visited the
> > manufacturer
> > > and seen for myself) and special order delivery times can run
sometimes
> > as
> > > long as 10-12 weeks.
> > > My most recent delivery was for reference, delivered here yesterday on
> an
> > > order placed on June 8th.
> > > sorry to be spamming this group..I said I wouldn't do it and I do try
> not
> > to
> > > but after seeing Paul's 3rd or 4th posting of this same message I feel
> > > justified (this time)
> > > Respectfully
> > > Tim Mara
> > > www.wingsandwheels.com
> > >
> > >
> > > "Paul Remde" > wrote in message
> > > news:d_IIc.77999$Oq2.44875@attbi_s52...
> > > > Hi,
> > > >
> > > > I'm in the process of creating my Winter products web site right
now.
> > You
> > > > can view the preliminary page at:
> > > > http://www.cumulus-soaring.com/winter.htm I have added the speed
> rings
> > to
> > > > the web page but the rest of the data is preliminary.
> > > >
> > > > Thank you,
> > > >
> > > > Paul Remde
> > > > Cumulus Soaring, Inc.
> > > > http://www.cumulus-soaring.com
> > > >
> > > > "Slick" > wrote in message
> > > > ...
> > > > > what would the cost be? We have a Winter in there as well as an
> > > electronic
> > > > > vario, I would have to go to the field to find out what the
> > manufacturer
> > > > of
> > > > > that is.
> > > > > "Paul Remde" > wrote in message
> > > > > news:LgRHc.62232$Oq2.6300@attbi_s52...
> > > > > > Hi,
> > > > > >
> > > > > > What vario are you mounting the speed ring on? Winter can
provide
> > an
> > > > > > extremely nice one that will fit onto a Winter vario. The
> > lead-time
> > > is
> > > > > > about 3 weeks.
> > > > > >
> > > > > > I'm in the process of creating my Winter products web page. It
> will
> > > be
> > > > > > available in a few days. I could order the ring for you along
> with
> > my
> > > > > first
> > > > > > stocking order.
> > > > > >
> > > > > > Good Soaring,
> > > > > >
> > > > > > Paul Remde
> > > > > > Cumulus Soaring, Inc.
> > > > > > http://www.cumulus-soaring.com
> > > > > >
> > > > > > "Slick" > wrote in message
> > > > > > ...
> > > > > > > Does anyone know where I can get a speed ring for a Grob-102
> club?
> > > I'd
> > > > > > > rather have a manufactured one than make my own.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > > > > > > http://www.newsfeeds.com - The #1 Newsgroup Service in the
> World!
> > > > > > > -----== Over 100,000 Newsgroups - 19 Different Servers!
=-----
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > > > > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > > > > -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> > > >
> > > >
> > >
> > >
> > >
> >
> >
>
>
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----