For Sale M&H KF-011 Oxygen Bottle

[Bryce Sammeter]

For Sale, M&H lightweight KF-011 Kevlar fiber wrapped oxygen bottle. Came as a spare with glider purchase. Manufactured 9/2011 and looks brand new and appears to possibly be unused. Installed CGA-540 valve with pressure gauge.. Appears to need hydro. Will ship for free in U.S., Discounted shipping abroad. Retails for $665 new from M&H, Asking $390 O.B.O

[Charlie M. (UH & 002 owner/pilot)]

M&H or MH?
I believe M&H does repairs (Elmira, NY), MH is Mountain High and does O2 systems.

[Bryce Sammeter]

MH

[glidergeek]

Dimensions?

[David Sherrill]

On Thursday, March 22, 2018 at 2:48:28 AM UTC-4, Glidergeek wrote:
> Dimensions?

http://www.mhoxygen.com/index.php/cylinders/kevlar
or
http://www.mhoxygen.com/index.php/component/attachments/download/118

Description (F): KF-011, For built-in soaring aircraft & EDS portable applications
Diameter: 9.3cm. (3.62 inch)
Length: 48.5cm. (19.1 inch) (without valve) add 2" for valve
Avg. Weight: 1.0 kg. (2.4 lbs)
Max. Volume: 311 liters (11 cu. ft.) @ 128 bar (1850 psig.)
THREADS: 3/4-16 UNF (SAE-8)

[Bryce Sammeter]

Dave, you beat me to it. Thanks.

[glidergeek]

Thanks guys, i've got a DG 600 with an oddball size hole for the O2 bottle.. I put a 13 cu" aluminum bottle in the hole and I have to wrap it, in my case I use a bit of felt seems like it's about an inch and a half too small for the hole. Sounds like this bottle is even smaller diameter.

[OHM Ω http://aviation.derosaweb.net]

Couple of things;

Measuring O2 bottles. I had a devil of a time finding one to fit my ASW-27.. Someone would say it had a diameter of X which should have fit only to find it did not as measuring a cylinder's (sleeve's) diameter is tricky without a outside (inside) caliper. I finally determined that the best way to accurately know if someone's bottle would fit my sleeve was to give them my required circumference.

Ill fitting bottles in oversized sleeves. A friend had this issue and used some large diameter plastic plumbing tubing from the hardware store. Took a few goes to get the right size. For this to work depends on the type of bottle clamp you have. The type that grabs the bottle's neck works for this solution. The one that clamps the bottle's body does not. I prefer the neck type found in my old DG as more secure but I have the body type in my ASW. ;-(

My $0.02.

- John OHM Ω

[Dan Marotta]

If your ship is licensed as an experimental, you could fabricate (or
have it done) a steel stop, bent into an "L" shape with a semicircular
cut at the top sized to the external dimension of the neck of the
bottle.Â* This could be bolted down with the bracket holding the bottle
in place.Â* Just thinking...

On 3/23/2018 6:42 AM, OHM Ω http://aviation.derosaweb.net wrote:
> Couple of things;
>
> Measuring O2 bottles. I had a devil of a time finding one to fit my ASW-27. Someone would say it had a diameter of X which should have fit only to find it did not as measuring a cylinder's (sleeve's) diameter is tricky without a outside (inside) caliper. I finally determined that the best way to accurately know if someone's bottle would fit my sleeve was to give them my required circumference.
>
> Ill fitting bottles in oversized sleeves. A friend had this issue and used some large diameter plastic plumbing tubing from the hardware store. Took a few goes to get the right size. For this to work depends on the type of bottle clamp you have. The type that grabs the bottle's neck works for this solution. The one that clamps the bottle's body does not. I prefer the neck type found in my old DG as more secure but I have the body type in my ASW. ;-(
>
> My $0.02.
>
> - John OHM Ω

--
Dan, 5J

[Kelvyn Flavall]

Is the oxygen bottle still available?

[Bryce Sammeter]

To anyone interested, the cylinder is still for sale.

[GeneReinecke]

On Saturday, April 7, 2018 at 3:28:12 PM UTC-6, Bryce Sammeter wrote:
> To anyone interested, the cylinder is still for sale.

Bryce:
I emailed you privately.
If still for sale contact me at generein at aol.com
Thanks
Gene

[Bryce Sammeter]

Gene,

I think maybe your email got kicked back. The bottle is still available.

Bryce

[Bryce Sammeter]

Bottle is Sold