ILEC SN10 v2.44 released

[Dave Nadler]

ILEC SN10/SN10B version 2.44 is now available at:
http://www.nadler.com/sn10/SN10_Resource_Index.html
Details available in README at the above site.

Please note: If you are using FLARM with SN10 and
a PDA, Oudie, TopHat, etc:
make SURE to update your FLARM to version 6.60 available here:
https://flarm.com/support/firmware-updates/download-firmware/

Enjoy!
Best Regards, Dave

PS: This marks 21 years of continual updates and service ;-)

[AS]

>> This marks 21 years of continual updates and service ;-) <<

Thank you for that! Being a relatively new user of an SN10b (my glider came with one), I had a few incidents where I was sure I killed the instrument. Dave had the correct answers for me within a few minutes after I sent him an email describing what the unit was doing - or not doing.
Dave - please quit hopping out of gliders, will you? ;-)

Uli
'AS'

[Karl Striedieck[_2_]]

Thanks for that 21 years Dave. None out there like you!

KS

On Saturday, July 14, 2018 at 4:33:43 PM UTC-4, Dave Nadler wrote:
> ILEC SN10/SN10B version 2.44 is now available at:
> http://www.nadler.com/sn10/SN10_Resource_Index.html
> Details available in README at the above site.
>
> Please note: If you are using FLARM with SN10 and
> a PDA, Oudie, TopHat, etc:
> make SURE to update your FLARM to version 6.60 available here:
> https://flarm.com/support/firmware-updates/download-firmware/
>
> Enjoy!
> Best Regards, Dave
>
> PS: This marks 21 years of continual updates and service ;-)

[[email protected]]

On Saturday, July 14, 2018 at 9:47:56 PM UTC-4, Karl Striedieck wrote:
> Thanks for that 21 years Dave. None out there like you!
>
> KS

Same. I've never actually bought one of Dave's SN10s (sorry...) but he has nevertheless provided advice on a handful of technical problems I've had over the years (e.g., with FLARM).

Then there's his timeless May 1987 safety article that I provided to the participants at R2N last month following up on a safety talk. Indeed, he has an enviable record...and is alive to keep adding to it!!!

Chip Bearden

[JS[_5_]]

Thanks for staying above ground Dave.
Does v2.44 have the option "no sink tone in climb mode"????
Jim

[Dave Nadler]

On Sunday, July 15, 2018 at 12:02:25 AM UTC-4, JS wrote:
> Does v2.44 have the option "no sink tone in climb mode"????

The SN10 has the "KS no bad news" option since 2003.
That suppresses the "speed-up" audio signal in cruise.
But if you insist on circling in sink the SN10 still reminds you ;-)

[Jonathan St. Cloud]

On Saturday, July 14, 2018 at 6:47:56 PM UTC-7, Karl Striedieck wrote:
> Thanks for that 21 years Dave. None out there like you!
>
> KS
>
> On Saturday, July 14, 2018 at 4:33:43 PM UTC-4, Dave Nadler wrote:
> > ILEC SN10/SN10B version 2.44 is now available at:
> > http://www.nadler.com/sn10/SN10_Resource_Index.html
> > Details available in README at the above site.
> >
> > Please note: If you are using FLARM with SN10 and
> > a PDA, Oudie, TopHat, etc:
> > make SURE to update your FLARM to version 6.60 available here:
> > https://flarm.com/support/firmware-updates/download-firmware/
> >> > Enjoy!
> > Best Regards, Dave
> >
> > PS: This marks 21 years of continual updates and service ;-)

Just for a frame of reference, Windows XP was officially supported for 12 years.

https://support.microsoft.com/en-us/help/14223/windows-xp-end-of-support