Longest wearing 5.50 tires

[Doug]

I need some 5.50 tires and I want Loooong wearing, as the labor is
high. Don't care much about price of the tire. Any suggestions?

[Al Marzo]

Michelin

On 13 Aug 2004 02:32:31 -0700, (Doug)
wrote:

>I need some 5.50 tires and I want Loooong wearing, as the labor is
>high. Don't care much about price of the tire. Any suggestions?

[rip]

You might contact Desser Tire about retreads. A retread generally has
thicker treads, and can use a harder rubber compound. Cheaper, too.

Doug wrote:
> I need some 5.50 tires and I want Loooong wearing, as the labor is
> high. Don't care much about price of the tire. Any suggestions?

[Mike Rapoport]

I have found the longest wearing tires to be Desser's retreads. They are
the cheapest too.

Mike
MU-2
Helio Courier

"Doug" > wrote in message
om...
> I need some 5.50 tires and I want Loooong wearing, as the labor is
> high. Don't care much about price of the tire. Any suggestions?

[Lou Parker]

"Mike Rapoport" > wrote in message . net>...
> I have found the longest wearing tires to be Desser's retreads. They are
> the cheapest too.
>
> Mike
> MU-2
> Helio Courier
>
> "Doug" > wrote in message
> om...
> > I need some 5.50 tires and I want Loooong wearing, as the labor is
> > high. Don't care much about price of the tire. Any suggestions?



How long is long?

[Mike Rapoport]

YMMV but longer than anything else.

Mike
MU-2


"Lou Parker" > wrote in message
om...
> "Mike Rapoport" > wrote in message
. net>...
> > I have found the longest wearing tires to be Desser's retreads. They
are
> > the cheapest too.
> >
> > Mike
> > MU-2
> > Helio Courier
> >
> > "Doug" > wrote in message
> > om...
> > > I need some 5.50 tires and I want Loooong wearing, as the labor is
> > > high. Don't care much about price of the tire. Any suggestions?
>
>
>
> How long is long?

[Jim Weir]

A. Agreed, and if you can have somebody save some parTICularly nice casings,
they will retread YOUR casing rather than a random casing. I'm waiting until
the local flight school goes through one more Michelin and I'll have a full set
of Michelin casings to send down for retread. Then when I get them back, the
Goodyear Flight Customs that I've got on there now will go down.

B. Watch CAREFULLY if you use them on a retractible gear aircraft. The rubber
is just enough thicker that them may jam in the well if it is a particularly
tight fit.

Jim



"Mike Rapoport" >
shared these priceless pearls of wisdom:

->YMMV but longer than anything else.

Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com

[Bruce A. Frank]

BUT, though I like retreads the sidewalls have already received a
lifetimes worth of UV exposure. On planes that sit a lot the natural
sidewall checking gets worse and worse and can eventually crack through
the cord. If you fly a lot and go through a pair of tires in a year it
can be a good investment. If the plane wears tires out every 5 years the
retread might not be a good investment.

rip wrote:

> You might contact Desser Tire about retreads. A retread generally has
> thicker treads, and can use a harder rubber compound. Cheaper, too.
>
> Doug wrote:
> > I need some 5.50 tires and I want Loooong wearing, as the labor is
> > high. Don't care much about price of the tire. Any suggestions?

--
Bruce A. Frank, Editor "Ford 3.8/4.2L Engine and V-6 STOL
Homebuilt Aircraft Newsletter"
| Publishing interesting material|
| on all aspects of alternative |
| engines and homebuilt aircraft.|