Fabric Adhesive Question

[MNLou]

To the RAS knowledge base -

I had to strip some fabric liner from my cockpit (LAK17AT) to do some wiring. The original adhesive looks like a spray or brush product. It is no longer "sticky".

I put the fabric back in place with double sided tape. That has failed. (Possibly due to our colder temps.)

What is the best product to use for holding the fabric in place?

Thanks in advance -

Lou

[Karl Kunz[_2_]]

This worked great when I redid the interior of my Cessna
https://www.amazon.com/3M-38808-Headliner-Fabric-Adhesive/dp/B004MEBENM/ref=sr_1_3?hvadid=174224092043&hvdev=c&hvlocphy=9031886&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=18309301732264679796&hvtargid=kwd-5250448055&keywords=3m+fabric+adhesive&qid=1554846352&s=gateway&sr=8-3

[[email protected]]

Pretty much the same stuff by "Gunk" is available at your local autoparts store.

[6PK]

On Tuesday, April 9, 2019 at 2:17:00 PM UTC-7, MNLou wrote:
> To the RAS knowledge base -
>
> I had to strip some fabric liner from my cockpit (LAK17AT) to do some wiring. The original adhesive looks like a spray or brush product. It is no longer "sticky".
>
> I put the fabric back in place with double sided tape. That has failed. (Possibly due to our colder temps.)
>
> What is the best product to use for holding the fabric in place?
>
> Thanks in advance -
>
> Lou

Chances are they originally used brushed or sprayed on contact cement, which you can just simply re-apply. If not familiar with it's application you should read up on it first. Note; there are mainly "green" labeled contact cements available in hardware stores and my experience with them is negative at best. The old fashioned stuff nowadays comes in small containers only, and one needs to look for it.

[Karl Kunz[_2_]]

If you would rather use the "goop" you can get Duraseam Trim Cement from Airtex Interiors.

[Charles Longley]

3M 1300L

[Richard Pfiffner[_2_]]

On Wednesday, April 10, 2019 at 8:51:13 AM UTC-7, Charles Longley wrote:
> 3M 1300L

Weldwood contact cement, Home Depot

Richard
www.craggyaero.com