Dittle FSG50-wiring

[[email protected]]

We have a Dittle FSG50 in one of our sailplanes. It is equipped with a
hand mic and we would like to put in a boom mic and a push to talk
switch. Does anyone know the pin outs for these?

Thanks!

Kurt

[John Sinclair]

The mike should go to 2 and 9. The PTT (press to talk)
should go to 5 and 6. If you're switching from a carbon
mike to a dynamic mike, then there's a couple of switches
inside the radio that have to be changed also.
Hope this helps,
JJ

At 04:30 27 December 2004,
wrote:
>We have a Dittle FSG50 in one of our sailplanes. It
>is equipped with a
>hand mic and we would like to put in a boom mic and
>a push to talk
>switch. Does anyone know the pin outs for these?
>
>Thanks!
>
>Kurt
>
>

[Tim Mara]

manual sent by email
tim
www.wingsandwheels.com

> wrote in message
ups.com...
> We have a Dittle FSG50 in one of our sailplanes. It is equipped with a
> hand mic and we would like to put in a boom mic and a push to talk
> switch. Does anyone know the pin outs for these?
>
> Thanks!
>
> Kurt
>