Request for a 337 form

[MC]

Robert asked me to post this request. Seems AOL has discontinued their
newsgroup service.
.................................................. ....

I have a Glasflugel 304CZ in the shop. the owner wants a Microair
transponder installed. Does anyone have a 337 form that I could have a copy
of covering a transponder instalation for this aircraft?

Thanks,
Robert Mudd
Moriarty, New Mexico

[chipsoars]

Bob,

the FAA website has everything-

http://forms.faa.gov/forms/faa337.pdf

Chip F

[chipsoars]

Search any form on FAA.gov

forms.faa.gov/forms/faa337.pdf


Chip F.

[[email protected]]

MC wrote:
> Robert asked me to post this request. Seems AOL has discontinued
their
> newsgroup service.
> .................................................. ...
>
> I have a Glasflugel 304CZ in the shop. the owner wants a Microair
> transponder installed. Does anyone have a 337 form that I could have
a copy
> of covering a transponder instalation for this aircraft?
>
> Thanks,
> Robert Mudd
> Moriarty, New Mexico
>

http://forms.faa.gov/forms/faa337.pdf

[[email protected]]

MC wrote:
> Robert asked me to post this request. Seems AOL has discontinued
their
> newsgroup service.
> .................................................. ...
>
> I have a Glasflugel 304CZ in the shop. the owner wants a Microair
> transponder installed. Does anyone have a 337 form that I could have
a copy
> of covering a transponder instalation for this aircraft?
>
> Thanks,
> Robert Mudd
> Moriarty, New Mexico
>

http://forms.faa.gov/forms/faa337.pdf

[[email protected]]

http://forms.faa.gov/forms/faa337.pdf

[[email protected]]

http://forms.faa.gov/forms/faa337.pdf

[MC]

The request is for a copy of a completed form, not a blank, of an
installation already completed. Submitting a copy of a completed approved
example of the installation in a type sailplane is an aid in getting the
installation approved.

thanks,

Mike

"MC" > wrote in message
...
> Robert asked me to post this request. Seems AOL has discontinued their
> newsgroup service.
> .................................................. ...
>
> I have a Glasflugel 304CZ in the shop. the owner wants a Microair
> transponder installed. Does anyone have a 337 form that I could have a
copy
> of covering a transponder instalation for this aircraft?
>
> Thanks,
> Robert Mudd
> Moriarty, New Mexico
>
>
>

[Fred]

Robert:

Why not just "installed such-and-such xpdr IAW manufacturer's
installation manual?" Your problem is going to be the antenna, though,
isn't it? You probably need to put an aluminum bulkhead from side to
side inside boom to make a ground plane. LaSor

[[email protected]]

Here is a link:

http://www.insightavionics.com/pdf%20files/337.pdf#search='337%20form'

By the way, what is your impression of the 304 in your shop?

Peter

MC wrote:
> Robert asked me to post this request. Seems AOL has discontinued
their
> newsgroup service.
> .................................................. ...
>
> I have a Glasflugel 304CZ in the shop. the owner wants a Microair
> transponder installed. Does anyone have a 337 form that I could have
a copy
> of covering a transponder instalation for this aircraft?
>
> Thanks,
> Robert Mudd
> Moriarty, New Mexico
>

[Robert Backer]

Not necessarily. I use this antenna with excellent results.

http://advancedaircraft.com/index.htm

Aircraft Spruce carries them. No ground plane needed.

Bob

Fred wrote:
> Robert:
>
> Why not just "installed such-and-such xpdr IAW manufacturer's
> installation manual?" Your problem is going to be the antenna, though,
> isn't it? You probably need to put an aluminum bulkhead from side to
> side inside boom to make a ground plane. LaSor
>

[Eric Greenwell]

Robert Backer wrote:
> Not necessarily. I use this antenna with excellent results.
>
> http://advancedaircraft.com/index.htm
>
> Aircraft Spruce carries them. No ground plane needed.

What glider, and where in the glider is it mounted? Is the fuselage
carbon? I'm collecting info to update my transponder article.

--
Change "netto" to "net" to email me directly

Eric Greenwell
Washington State
USA

[Tim Mara]

I also have these Dipole Transponder antenna's in stock
tim

Wings & Wheels
www.wingsandwheels.com





"Robert Backer" > wrote in message
...
> Not necessarily. I use this antenna with excellent results.
>
> http://advancedaircraft.com/index.htm
>
> Aircraft Spruce carries them. No ground plane needed.
>
> Bob
>
> Fred wrote:
>> Robert:
>>
>> Why not just "installed such-and-such xpdr IAW manufacturer's
>> installation manual?" Your problem is going to be the antenna, though,
>> isn't it? You probably need to put an aluminum bulkhead from side to
>> side inside boom to make a ground plane. LaSor
>>