Help with instrument wiring

[Bill Daniels]

I have a Borgelt B50, Volkslogger, and Aero 1550 that I need to get working
together. I am powering the PDA with a Goddard PS-5a power supply. I have
determined that all the devices are working correctly individually. The GPS
data should pass through the B50 which will add vario, airspeed, and other
data.

I need a wiring diagram for this combination that will include a
flight/declaration switch.

Can anyone help?

Bill Daniels

[01-- Zero One]

Bill, I can help you. I will email you offline.

Regards,

Larry Goddard
"01" USA





"Bill Daniels" > wrote in message
:

> I have a Borgelt B50, Volkslogger, and Aero 1550 that I need to get working
> together. I am powering the PDA with a Goddard PS-5a power supply. I have
> determined that all the devices are working correctly individually. The GPS
> data should pass through the B50 which will add vario, airspeed, and other
> data.
>
> I need a wiring diagram for this combination that will include a
> flight/declaration switch.
>
> Can anyone help?
>
> Bill Daniels

[Fish]

Bill,
If Larry can't help, email me. I have a printed cct board I made that
has DB9 plugs for connection of B50, Garmin35, Palm PDA (with rs232-ttl
level conversion, Microair radio DB15, RCA plugs for PTT, Vario audio
and Radio Speaker. it is setup for connection of a multipole switch so
you can switch a standby battery in with no break!

Cheers

Mark