"rubber bellows" for LS6 landing gear

[Richard Livingston]

We own an LS6a. During annual inspection our A&P noticed that one of the rubber bellows on a sliding link in the landing gear assy has split and needs to be replaced. Anyone know of a replacement part?

Rich L

[Dan Marotta]

On 11/16/20 6:57 AM, Richard Livingston wrote:
> We own an LS6a. During annual inspection our A&P noticed that one of the rubber bellows on a sliding link in the landing gear assy has split and needs to be replaced. Anyone know of a replacement part?
>
> Rich L
>

Hi Richard,

I haven't owned an LS-6 in 20 years or so, but I'll bet you could find
what you need at a motorcycle shop, either in person or on line.

I just did a search for "motorcycle rubber bellows" and found a boat
load of possibilities.

--
Dan
5J

[Raul Boerner]

On Monday, November 16, 2020 at 6:57:25 AM UTC-7, wrote:
> We own an LS6a. During annual inspection our A&P noticed that one of the rubber bellows on a sliding link in the landing gear assy has split and needs to be replaced. Anyone know of a replacement part?
>
> Rich L


Rich,

For my LS6-b, I bought rubber bellows from a motorcycle shop. The original boots had a different diameter opening at the two ends. My replacements have the same size openings; to accommodate, I made spacers using rubber stoppers.

Raul Boerner
PS: Dan M. gifted me his LS6 tail dolly, years ago--just fun information.

[Steve Leonard[_2_]]

On Monday, November 16, 2020 at 9:37:48 AM UTC-6, Raul Boerner wrote:

> PS: Dan M. gifted me his LS6 tail dolly, years ago--just fun information.

So, THAT is where my tail dolly went. :-)

Steve Leonard

[Raul Boerner]

On Tuesday, November 17, 2020 at 4:34:29 PM UTC-7, Steve Leonard wrote:
> On Monday, November 16, 2020 at 9:37:48 AM UTC-6, Raul Boerner wrote:
>
> > PS: Dan M. gifted me his LS6 tail dolly, years ago--just fun information.
> So, THAT is where my tail dolly went. :-)
>
> Steve Leonard

Steve, Small world. - Raul