Flarm error 43

[[email protected]]

I updated my flarm and SN10 software yesterday. (pf 7.04 and 2.46 respectively).

On startup the SN10 tells me I have flarm error 43 and the butterfly display shows a yellow triangle and another warning message that sounded fatal.

When I press the SN10 "help" button, the error message disappears and when I press the far left butterfly button, that warning also disappears and I get no further error messages and the SN10 gets gps input normally and the flarm seemed to work normally although I didn't get any traffic info because, I think, there was none to be had.

Does anybody know what flarm error 43 is or where I could find out?

[Nick Hill[_3_]]

On 20/05/2021 16:07, wrote:
> I updated my flarm and SN10 software yesterday. (pf 7.04 and 2.46 respectively).
>
> On startup the SN10 tells me I have flarm error 43 and the butterfly display shows a yellow triangle and another warning message that sounded fatal.
>
> When I press the SN10 "help" button, the error message disappears and when I press the far left butterfly button, that warning also disappears and I get no further error messages and the SN10 gets gps input normally and the flarm seemed to work normally although I didn't get any traffic info because, I think, there was none to be had.
>
> Does anybody know what flarm error 43 is or where I could find out?
>
>
>

Various Flarm uni manuals have

43 = Wrong ICAO 24-bit address or radio ID

--

Nick Hill

[Dan Daly[_2_]]

On Thursday, May 20, 2021 at 12:10:28 PM UTC-4, Nick Hill wrote:
> On 20/05/2021 16:07, wrote:
> > I updated my flarm and SN10 software yesterday. (pf 7.04 and 2.46 respectively).
> >
> > On startup the SN10 tells me I have flarm error 43 and the butterfly display shows a yellow triangle and another warning message that sounded fatal.
> >
> > When I press the SN10 "help" button, the error message disappears and when I press the far left butterfly button, that warning also disappears and I get no further error messages and the SN10 gets gps input normally and the flarm seemed to work normally although I didn't get any traffic info because, I think, there was none to be had.
> >
> > Does anybody know what flarm error 43 is or where I could find out?
> >
> >
> >
> Various Flarm uni manuals have
>
> 43 = Wrong ICAO 24-bit address or radio ID
>
> --
>
> Nick Hill
Butterfly error is due to compatibility with later flarm versions. Have you updated to version 4 of the Butterfly firmware? I will post a link momentarily.

[Dan Daly[_2_]]

On Thursday, May 20, 2021 at 12:50:41 PM UTC-4, Dan Daly wrote:
> On Thursday, May 20, 2021 at 12:10:28 PM UTC-4, Nick Hill wrote:
> > On 20/05/2021 16:07, wrote:
> > > I updated my flarm and SN10 software yesterday. (pf 7.04 and 2.46 respectively).
> > >
> > > On startup the SN10 tells me I have flarm error 43 and the butterfly display shows a yellow triangle and another warning message that sounded fatal.
> > >
> > > When I press the SN10 "help" button, the error message disappears and when I press the far left butterfly button, that warning also disappears and I get no further error messages and the SN10 gets gps input normally and the flarm seemed to work normally although I didn't get any traffic info because, I think, there was none to be had.
> > >
> > > Does anybody know what flarm error 43 is or where I could find out?
> > >
> > >
> > >
> > Various Flarm uni manuals have
> >
> > 43 = Wrong ICAO 24-bit address or radio ID
> >
> > --
> >
> > Nick Hill
> Butterfly error is due to compatibility with later flarm versions. Have you updated to version 4 of the Butterfly firmware? I will post a link momentarily.

Here is a link to the thread. The first item, from Dave Nadler, gives the link for the software update, and describes how to do it. Thanks again to Dave for keeping Butterfly Displays going! https://groups.google.com/g/rec.aviation.soaring/c/9V4KspBVCMI/m/eNCyO1mnCwAJ

[[email protected]]

On Thursday, May 20, 2021 at 12:53:48 PM UTC-4, Dan Daly wrote:
> On Thursday, May 20, 2021 at 12:50:41 PM UTC-4, Dan Daly wrote:
> > On Thursday, May 20, 2021 at 12:10:28 PM UTC-4, Nick Hill wrote:
> > > On 20/05/2021 16:07, wrote:
> > > > I updated my flarm and SN10 software yesterday. (pf 7.04 and 2.46 respectively).
> > > >
> > > > On startup the SN10 tells me I have flarm error 43 and the butterfly display shows a yellow triangle and another warning message that sounded fatal.
> > > >
> > > > When I press the SN10 "help" button, the error message disappears and when I press the far left butterfly button, that warning also disappears and I get no further error messages and the SN10 gets gps input normally and the flarm seemed to work normally although I didn't get any traffic info because, I think, there was none to be had.
> > > >
> > > > Does anybody know what flarm error 43 is or where I could find out?
> > > >
> > > >
> > > >
> > > Various Flarm uni manuals have
> > >
> > > 43 = Wrong ICAO 24-bit address or radio ID
> > >
> > > --
> > >
> > > Nick Hill
> > Butterfly error is due to compatibility with later flarm versions. Have you updated to version 4 of the Butterfly firmware? I will post a link momentarily.
> Here is a link to the thread. The first item, from Dave Nadler, gives the link for the software update, and describes how to do it. Thanks again to Dave for keeping Butterfly Displays going! https://groups.google.com/g/rec.aviation.soaring/c/9V4KspBVCMI/m/eNCyO1mnCwAJ
Thanks, everyone!