Query for Jim Weir re RST Panel Mount Intercom

[[email protected]]

Jim,
Please advise availability status for the RST panel mount intercom kit.
Thanks,
Joe

[Jim Weir]

Excellent timing. The first production run is being kitted up as we speak and
we are attempting to finalize the market price as a function of actual costs
that were just delivered last week. I'll post here as another reply when the
price is determined.

Jim




shared these priceless pearls of wisdom:

->Jim,
->Please advise availability status for the RST panel mount intercom kit.
->Thanks,
->Joe

Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com

[[email protected]]

Just a quick question on the high and low limit LED operation. As I
read the schematic both U1B and U1D would light if the voltage to the
meter exceded the reference voltages set by the R11-R12 and R13-R14
voltage deviders as the measured signal is applied to the + (non
inverting) input of both comparators.

Am I right in assuming the connections on U1D should be reversed so
the LED lights when the measured signal is LESS THAN the reference??

[Jim Weir]

RST-443 - $143
Pictures being taken today (Sunday, 14 Nov)
Kitting due late next week (Friday, 19 Nov)
Should be shelf stock and shippable the week after Thanksgiving.

Thanks for the interest.

Jim



shared these priceless pearls of wisdom:

->Jim,
->Please advise availability status for the RST panel mount intercom kit.
->Thanks,
->Joe

Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com