Headsets that let you hear the wind?

[[email protected]]

I was doing pattern work recently with a crummy old headset with poor
seals. I was expecting just to be annoyed by the extra noise (and of
course, I was) but what really surprised me was how much information
was in the wind noise -- as I sped up, slowed down, applied flaps, etc.
I could really hear it even without looking at the airspeed indicator.
It made me feel more in-tune with the airplane, and I liked it a lot,
in the pattern. Probably a lot less attractive during cruise.

I can't think of a way to achieve this effect on purpose with a decent
headset. It seems like jamming somthing under the ear cup would be
uncomfortable and bad for the seals. Is there anybody else who likes to
listen to their airplane *sometimes*, without giving up the radio? How
do you do it? I'll be buying a new headset next week at Oshkosh.

[Darrel Toepfer]

wrote:

> I can't think of a way to achieve this effect on purpose with a decent
> headset. It seems like jamming somthing under the ear cup would be
> uncomfortable and bad for the seals. Is there anybody else who likes to
> listen to their airplane *sometimes*, without giving up the radio? How
> do you do it? I'll be buying a new headset next week at Oshkosh.

Microphone and selector switch set to SPEAKER...

[RST Engineering]

Drill a hole in the earcups. THe bigger the hole, the more noise you will
get. Want to put it back to reasonably stock attenuation? Put a plastic
botch button in the hole and RTV it in from the inside.

Jim


.. Is there anybody else who likes to
> listen to their airplane *sometimes*, without giving up the radio? How
> do you do it? I'll be buying a new headset next week at Oshkosh.
>

[AliR]

Or simply take one ear out of the headset cup. Works pretty good.

AliR.

> wrote in message
oups.com...
> I was doing pattern work recently with a crummy old headset with poor
> seals. I was expecting just to be annoyed by the extra noise (and of
> course, I was) but what really surprised me was how much information
> was in the wind noise -- as I sped up, slowed down, applied flaps, etc.
> I could really hear it even without looking at the airspeed indicator.
> It made me feel more in-tune with the airplane, and I liked it a lot,
> in the pattern. Probably a lot less attractive during cruise.
>
> I can't think of a way to achieve this effect on purpose with a decent
> headset. It seems like jamming somthing under the ear cup would be
> uncomfortable and bad for the seals. Is there anybody else who likes to
> listen to their airplane *sometimes*, without giving up the radio? How
> do you do it? I'll be buying a new headset next week at Oshkosh.
>
>

[Dale]

In article . com>,
wrote:

> I was doing pattern work recently with a crummy old headset with poor
> seals. I was expecting just to be annoyed by the extra noise (and of
> course, I was) but what really surprised me was how much information
> was in the wind noise -- as I sped up, slowed down, applied flaps, etc.
> I could really hear it even without looking at the airspeed indicator.
> It made me feel more in-tune with the airplane, and I liked it a lot,
> in the pattern. Probably a lot less attractive during cruise.
>
> I can't think of a way to achieve this effect on purpose with a decent
> headset. It seems like jamming somthing under the ear cup would be
> uncomfortable and bad for the seals. Is there anybody else who likes to
> listen to their airplane *sometimes*, without giving up the radio? How
> do you do it? I'll be buying a new headset next week at Oshkosh.
>

Here's a way to do it....noise cancelling headset.

--
Dale L. Falk

There is nothing - absolutely nothing - half so much worth doing
as simply messing around with airplanes.

http://home.gci.net/~sncdfalk/flying.html

[Paul kgyy]

Most ANR headsets concentrate on noise reduction at engine speeds and
actually allow quite a bit of high frequency noise to be heard. I had
a problem with my door seal a while back and it was clearly audible
with my Lightspeed 30-3G even though it does an excellent job of
reducing engine noise.

[houstondan]

wolfgang langewiesche would be proud.


dan

[Adam Aulick]

Thanks everybody for the suggestions. I should have added that I can't
use the radio without the headset, don't want to damage the headset, and
don't want to look like a nut in front of my passengers with my headset
half-off, which leaves "buy an ANR headset with poor passive noise
reduction" Sounds good to me!

I can picture the funny looks from the headset vendors already....