part for Fuel computer-attn Jim weir

[Billc851]

Jim, in your stuff would you have across reference for a sprague 200z641
dc-dc converter its used in a safe (af1-1) fuel flow instrument.. [8-16vdc
to 200v reg]

if I knew what the spec were I might be able to use something else or unless
you have one.
Its one of those "good buys" at the Oshkosh flymart- it would be better if
it worked..now its a wheel chock

Thanks in advance.. Bill

[RST Engineering]

Sorry, that's a little out of my junkbox line. I'll do a little searching
around to see what I can come up with.

What in the devil is a fuel flow instrument doing with a 200 volt power
supply, unless it has fluorescent digits?

Jim


"Billc851" > wrote in message
...
> Jim, in your stuff would you have across reference for a sprague 200z641
> dc-dc converter its used in a safe (af1-1) fuel flow instrument.. [8-16vdc
> to 200v reg]
>
> if I knew what the spec were I might be able to use something else or
> unless you have one.
> Its one of those "good buys" at the Oshkosh flymart- it would be better if
> it worked..now its a wheel chock
>
> Thanks in advance.. Bill
>