looking for a 75 to 100 ton press brake about 8/10 ft

[Adrian eyre]

hi we are looking for a 75 to 100 ton press brake about 8/10 ft

must be manual no fancy electronics

need for helping to produce body panels for classic cars in our
workshop at Earlpart

if anybody can point us in the right direction we would be very
grateful thank you

You can contact us at

Further contact can be found at our website at www.earl-part.co.uk

We are based in UK Derbyshire

any help will be appreciated

Thank You on behalf of Adrian Eyre

[John Kimmel]

You can build your own. Usher Enterprises did.

Adrian eyre wrote:
> hi we are looking for a 75 to 100 ton press brake about 8/10 ft
>
> must be manual no fancy electronics
>
> need for helping to produce body panels for classic cars in our
> workshop at Earlpart
>
> if anybody can point us in the right direction we would be very
> grateful thank you
>
> You can contact us at
>
> Further contact can be found at our website at www.earl-part.co.uk
>
> We are based in UK Derbyshire
>
> any help will be appreciated
>
> Thank You on behalf of Adrian Eyre

--
John Kimmel


GET YER STINKING PAWS OFF ME YOU DAMN DIRTY APE!