Gary T. Ciampa
February 6th 05, 12:00 AM
References: >
In-Reply-To: >
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Lines: 28
Date: Fri, 07 Jan 2005 00:06:06 GMT
NNTP-Posting-Host: 24.163.80.109
X-Complaints-To:
X-Trace: twister.southeast.rr.com 1105056366 24.163.80.109 (Thu, 06 Jan 2005 19:06:06 EST)
NNTP-Posting-Date: Thu, 06 Jan 2005 19:06:06 EST
Organization: Road Runner - NC
Xref: number1.nntp.dca.giganews.com rec.aviation.homebuilt:286402 rec.aviation.owning:158583
Gary T. Ciampa wrote:
> All,
>
> This information may be well known but I felt compelled to pass it along.
>
> I've been searching for a Nicopress Swaging tool and choking on the
> prices at the typcial aircraft supply companies.
>
> Turns out that Lowes has a Campbell Nicipress tool, 1/16 to 1/8 of an
> inch for $24.95. The tool is located in the rope,chain and stell cable
> area.
>
> I assume the less expense tool will perform adequately, based on
> go/no-go verification.
>
> Cheers,
>
> Gary
BTW: As it turns out, the tools from Lowes was NOT, I repeat, NOT
sufficient for the nicopress compression sleeves.
Sorry about the false advertising! I ended up ordering an aviation
approved tool.
Regards,
Gary
In-Reply-To: >
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Lines: 28
Date: Fri, 07 Jan 2005 00:06:06 GMT
NNTP-Posting-Host: 24.163.80.109
X-Complaints-To:
X-Trace: twister.southeast.rr.com 1105056366 24.163.80.109 (Thu, 06 Jan 2005 19:06:06 EST)
NNTP-Posting-Date: Thu, 06 Jan 2005 19:06:06 EST
Organization: Road Runner - NC
Xref: number1.nntp.dca.giganews.com rec.aviation.homebuilt:286402 rec.aviation.owning:158583
Gary T. Ciampa wrote:
> All,
>
> This information may be well known but I felt compelled to pass it along.
>
> I've been searching for a Nicopress Swaging tool and choking on the
> prices at the typcial aircraft supply companies.
>
> Turns out that Lowes has a Campbell Nicipress tool, 1/16 to 1/8 of an
> inch for $24.95. The tool is located in the rope,chain and stell cable
> area.
>
> I assume the less expense tool will perform adequately, based on
> go/no-go verification.
>
> Cheers,
>
> Gary
BTW: As it turns out, the tools from Lowes was NOT, I repeat, NOT
sufficient for the nicopress compression sleeves.
Sorry about the false advertising! I ended up ordering an aviation
approved tool.
Regards,
Gary