Bruce A. Frank
January 18th 05, 06:04 PM
I belong to EAA Chapter 62 here in San Jose, CA. We recently received a
donation of a freshly built Ford 3.8L V-6 complete with 2:1 cogbelt
PSRU,
prop (may be the McCauley 8467...have to check) and radiator. The club
has
the whole package for sale for $2900. If you are interested contact Jack
Bowlus at 831-637-1137,
The gentleman who built the engine, as I understand, died before he
could
fly the plane with it installed, a Cherokee (no, I do not know how
unless
just as a test bed) The engine was pulled and the original installed in
the plane so it could be sold. The PSRU alone is worth $2000 to $3000
and a
useful prop close to $1000. We'd like to sell it as a package. Make an
offer realizing that you'll need to go completely through the engine to
make sure all the mods have been made as recommended.
--
Bruce A. Frank
======================
Aircraft Projects
Fuel Tank Fabrication
TIG, MIG & Oxy/Acet Welding & Brazing
donation of a freshly built Ford 3.8L V-6 complete with 2:1 cogbelt
PSRU,
prop (may be the McCauley 8467...have to check) and radiator. The club
has
the whole package for sale for $2900. If you are interested contact Jack
Bowlus at 831-637-1137,
The gentleman who built the engine, as I understand, died before he
could
fly the plane with it installed, a Cherokee (no, I do not know how
unless
just as a test bed) The engine was pulled and the original installed in
the plane so it could be sold. The PSRU alone is worth $2000 to $3000
and a
useful prop close to $1000. We'd like to sell it as a package. Make an
offer realizing that you'll need to go completely through the engine to
make sure all the mods have been made as recommended.
--
Bruce A. Frank
======================
Aircraft Projects
Fuel Tank Fabrication
TIG, MIG & Oxy/Acet Welding & Brazing