WANTING GYRO POWER SUPPLY ????

[Tony]

Does anyone have a circuit diagram or access to power supplies for
Litton G200 Gyros ???

[ngreader]

"Tony" > wrote in message
ups.com...
> Does anyone have a circuit diagram or access to power supplies for
> Litton G200 Gyros ???

Mfr keeps these under wraps.

U R (likely) SOL

[clare at snyder.on.ca]

On Tue, 07 Mar 2006 15:36:29 GMT, "ngreader" >
wrote:

>
>"Tony" > wrote in message
ups.com...
>> Does anyone have a circuit diagram or access to power supplies for
>> Litton G200 Gyros ???
>
>Mfr keeps these under wraps.
>
>U R (likely) SOL
>
I used to have a little "dynamotor" inverter that made 400cps 3 phase
from 24 volts - have not seen it for a couple of years,
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***

[Dan]

clare at snyder.on.ca wrote:
> On Tue, 07 Mar 2006 15:36:29 GMT, "ngreader" >
> wrote:
>
>> "Tony" > wrote in message
>> ups.com...
>>> Does anyone have a circuit diagram or access to power supplies for
>>> Litton G200 Gyros ???
>> Mfr keeps these under wraps.
>>
>> U R (likely) SOL
>>
> I used to have a little "dynamotor" inverter that made 400cps 3 phase
> from 24 volts - have not seen it for a couple of years,
> *** Free account sponsored by SecureIX.com ***
> *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***


I have a dynamotor that weighs about 10 pounds. I use it to power
test equipment. Too heavy for aircraft.

Dan, U.S. Air Force, retired

[clare at snyder.on.ca]

On Tue, 07 Mar 2006 12:14:04 -0600, Dan > wrote:

>clare at snyder.on.ca wrote:
>> On Tue, 07 Mar 2006 15:36:29 GMT, "ngreader" >
>> wrote:
>>
>>> "Tony" > wrote in message
>>> ups.com...
>>>> Does anyone have a circuit diagram or access to power supplies for
>>>> Litton G200 Gyros ???
>>> Mfr keeps these under wraps.
>>>
>>> U R (likely) SOL
>>>
>> I used to have a little "dynamotor" inverter that made 400cps 3 phase
>> from 24 volts - have not seen it for a couple of years,
>> *** Free account sponsored by SecureIX.com ***
>> *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
>
>
> I have a dynamotor that weighs about 10 pounds. I use it to power
>test equipment. Too heavy for aircraft.
>
>Dan, U.S. Air Force, retired
Mine was less than 5 lbs and came from a plane.
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***

[Dan]

clare at snyder.on.ca wrote:
> On Tue, 07 Mar 2006 12:14:04 -0600, Dan > wrote:
>
>> clare at snyder.on.ca wrote:
>>> On Tue, 07 Mar 2006 15:36:29 GMT, "ngreader" >
>>> wrote:
>>>
>>>> "Tony" > wrote in message
>>>> ups.com...
>>>>> Does anyone have a circuit diagram or access to power supplies for
>>>>> Litton G200 Gyros ???
>>>> Mfr keeps these under wraps.
>>>>
>>>> U R (likely) SOL
>>>>
>>> I used to have a little "dynamotor" inverter that made 400cps 3 phase
>>> from 24 volts - have not seen it for a couple of years,
>>> *** Free account sponsored by SecureIX.com ***
>>> *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
>>
>> I have a dynamotor that weighs about 10 pounds. I use it to power
>> test equipment. Too heavy for aircraft.
>>
>> Dan, U.S. Air Force, retired
> Mine was less than 5 lbs and came from a plane.
> *** Free account sponsored by SecureIX.com ***
> *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***

Mine came from an airplane too, I was intending to mean too heavy in
the context of home builts.

I have a couple of 26 VAC 400 hz single phase inverters. Handy dandy
for synchros.

Dan, U.S. Air Force, retired