Log in

View Full Version : Dittel FSG-71M LCD


Marc Ramsey
May 10th 06, 10:16 AM
I have a circa '92 Dittel FSG-71M in a newly purchased glider which
works fine, except that the LCD is in bad shape. The digits are barely
readable due to lack of contrast, the LCD glass looks to have sustained
some sort of damage. Has anyone replaced one of these?

Marc

Willy VINKEN
May 10th 06, 05:41 PM
Never found it as standard opto-electronics replacement part.
I finally ordered one directly from Walter DITTEL
http://www.dittel.com/english/kontakt.php
You get a complete kit with reflector and and contact strips.
I remember it was not expensive and the replacement job
was quite straightforward.

Willy


On Wed, 10 May 2006 09:16:14 GMT, Marc Ramsey >
wrote:

>I have a circa '92 Dittel FSG-71M in a newly purchased glider which
>works fine, except that the LCD is in bad shape. The digits are barely
>readable due to lack of contrast, the LCD glass looks to have sustained
>some sort of damage. Has anyone replaced one of these?
>
>Marc

Marc Ramsey
May 10th 06, 05:54 PM
Willy VINKEN wrote:
> Never found it as standard opto-electronics replacement part.
> I finally ordered one directly from Walter DITTEL
> http://www.dittel.com/english/kontakt.php
> You get a complete kit with reflector and and contact strips.
> I remember it was not expensive and the replacement job
> was quite straightforward.

Thanks, that is what I wanted to know...

Marc

Georg Holderied
May 10th 06, 08:28 PM
Marc Ramsey schrieb:
> I have a circa '92 Dittel FSG-71M in a newly purchased glider which
> works fine, except that the LCD is in bad shape. The digits are barely
> readable due to lack of contrast, the LCD glass looks to have sustained
> some sort of damage. Has anyone replaced one of these?

I've replaced two LCDs. They get bad after a few years.
Replacement displays are not very expensive.
I don't remember the details but replacement is straightforward. The
display is clamped between the front panel and a circuit board.

George

http://www.glidingbasel.ch/

Tim Mara
May 11th 06, 12:08 AM
send it to Rick Lord at Erie Aviation.he does Walter Dittel repairs there
www.erieaviation.com


tim
Wings & Wheels
www.wingsandwheels.com


"Marc Ramsey" > wrote in message
. com...
>I have a circa '92 Dittel FSG-71M in a newly purchased glider which works
>fine, except that the LCD is in bad shape. The digits are barely readable
>due to lack of contrast, the LCD glass looks to have sustained some sort of
>damage. Has anyone replaced one of these?
>
> Marc

Google