Seeyou NMEA to Winpilot/Seeyou

[Jean]

Hello,

Did any one succeeded to feed Winpilot (or Seeyou Mobile) with the NMEA
output of Seeyou
- Via Bluetooth ?
- Via USB craddle ?

Thanks
Jean

[chris]

Jean wrote:
> Hello,
>
> Did any one succeeded to feed Winpilot (or Seeyou Mobile) with the NMEA
> output of Seeyou
> - Via Bluetooth ?
> - Via USB craddle ?
>
> Thanks
> Jean

I've had luck in running Winpilot with a NEMA output from both SeeYou
and Condor simulator. The main criteria is to have it output to a
serial port and to have the com port number assigned correctly on the
output.
I do not think these programs are setup to accept input via the
bluetooth or usb [but i may be wrong], I would expect you to have good
luck with the old syle serial port.

Chris

[Jean]

Did work ultimately - by defining a "serial" connection from the IPAQ BT
manager. Still a conflict with Activesync ..

"chris" > a écrit dans le message de news:
om...
>
> Jean wrote:
>> Hello,
>>
>> Did any one succeeded to feed Winpilot (or Seeyou Mobile) with the NMEA
>> output of Seeyou
>> - Via Bluetooth ?
>> - Via USB craddle ?
>>
>> Thanks
>> Jean
>
> I've had luck in running Winpilot with a NEMA output from both SeeYou
> and Condor simulator. The main criteria is to have it output to a
> serial port and to have the com port number assigned correctly on the
> output.
> I do not think these programs are setup to accept input via the
> bluetooth or usb [but i may be wrong], I would expect you to have good
> luck with the old syle serial port.
>
> Chris
>

[chris]

Jean wrote:
> Did work ultimately - by defining a "serial" connection from the IPAQ BT
> manager. Still a conflict with Activesync ..
>
Yes, you have to turn off Acivesync. You can configure activesyn to not
make connections by port type [serial, usb etc].
This allows the port to be used by SeeYou for output.
Chris

[Vic]

Have create a new BT serial port "Server" from the Configuration Panel and
now it works in parallel with Activesync,
Jean

"Jean" > a écrit dans le message de news:
...
> Hello,
>
> Did any one succeeded to feed Winpilot (or Seeyou Mobile) with the NMEA
> output of Seeyou
> - Via Bluetooth ?
> - Via USB craddle ?
>
> Thanks
> Jean
>
>