Pinout for TERRA TRT-250 transponder

[Turaga]

Pinout for the 25-pin connector on my TERRA TRT-250 analog switch button transponder.

and

I have the referencemanual for the King KT76 - 78 (a) if someone have questions...

Tor Rene
Norway

Got my pin-diagram from Juan Jimenez today, THANX

This is how it looks:

TERRA TRT-250 TRANSPONDER

*17 - A2
*5 - A1
*15 - B1
*2 - B2
*14 - B4
*18 - C4
*16 - A4
*3 - C1
*4 - C2
*9 - D4
*1 - SUPPRESSION OUT
*8 and 20 - SWITCHED POWER OUT
*6 - EXT. DME SUPPRESSION IN
*7 and 19 - POWER IN 12 VDC
*11 and 21 - POWER GROUND
*12 and 24 - REMOTE GROUND

Cabel lengths:
RG-58A/U - max 9 ft.
RG-8A/U - 17 ft.

[Juan Jimenez[_1_]]

Check your email, I already responded to the email you sent me.

Anyone else who wants this...

http://www.bd5.com/trt250-250d_wiringdiagram.pdf

It's a wide page, just tape the two together for the full drawing. The
diagram is for both the 250 and the 250D.

"Turaga" > wrote in message
...
>
> Do anyone have it. Need the piout for the 25-pin connector on my TERRA
> TRT-250 analog switch button transponder. Weekend is getting close, and
> I was planning of put in order my transponder for regardless flying
> inside the controllzone this weekend... :)
>
> By the way, I have the referencemanual for the King KT76 - 78 (a) if
> someone have questions...
>
> Tor Rene
> Norway
>
>
>
>
> --
> Turaga



--
Posted via a free Usenet account from http://www.teranews.com

[Turaga]

Got my pin-diagram from Juan Jimenez today, THANX :)

This is how it looks:

TERRA TRT-250 TRANSPONDER

*17 - A2
*5 - A1
*15 - B1
*2 - B2
*14 - B4
*18 - C4
*16 - A4
*3 - C1
*4 - C2
*9 - D4
*1 - SUPPRESSION OUT
*8 and 20 - SWITCHED POWER OUT
*6 - EXT. DME SUPPRESSION IN
*7 and 19 - POWER IN 12 VDC
*11 and 21 - POWER GROUND
*12 and 24 - REMOTE GROUND

Cabel lengths:
RG-58A/U - max 9 ft.
RG-8A/U - 17 ft.

[Earls61]

Turaga wrote:
> Got my pin-diagram from Juan Jimenez today, THANX :)
>
> This is how it looks:
>
> TERRA TRT-250 TRANSPONDER
>
> *17 - A2
> *5 - A1
> *15 - B1
> *2 - B2
> *14 - B4
> *18 - C4
> *16 - A4
> *3 - C1
> *4 - C2
> *9 - D4
> *1 - SUPPRESSION OUT
> *8 and 20 - SWITCHED POWER OUT
> *6 - EXT. DME SUPPRESSION IN
> *7 and 19 - POWER IN 12 VDC
> *11 and 21 - POWER GROUND
> *12 and 24 - REMOTE GROUND
>
> Cabel lengths:
> RG-58A/U - max 9 ft.
> RG-8A/U - 17 ft.
>
>
>
>
> --
> Turaga
Turaga,

Did you know there is an old AD on
those?http://www.airweb.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/5DD6D47D56817DD686256A42006E6F93?OpenDocument

[Gerry Caron]

"Earls61" > wrote in message
oups.com...
> Turaga,
>
> Did you know there is an old AD on
> those?http://www.airweb.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/5DD6D47D56817DD686256A42006E6F93?OpenDocument
>

If you have a TRT-250 with Mod 5 or a TRT-250D with Mod 2 it has the fix
required by the AD.

Gerry

[Juan Jimenez[_1_]]

"Gerry Caron" > wrote in message
...
>
> "Earls61" > wrote in message
> oups.com...
>> Turaga,
>>
>> Did you know there is an old AD on
>> those?http://www.airweb.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/5DD6D47D56817DD686256A42006E6F93?OpenDocument
>>
>
> If you have a TRT-250 with Mod 5 or a TRT-250D with Mod 2 it has the fix
> required by the AD.
>
> Gerry

Beat me to it. :)

And the way to check the mod is to look for the label with the serial
number, the mod level is determined by looking at which number has been
taken off the sticker, or marked.



--
Posted via a free Usenet account from http://www.teranews.com

[Turaga]

****************************
Mine has the number five taken out, and it has just been at service and yellow-taged. So it should be ok, then I guess... :)

Tor, Norway
*****************************


"Gerry Caron" wrote in message
...

"Earls61" wrote in message
oups.com...
Turaga,

Did you know there is an old AD on
those?http://www.airweb.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/5DD6D47D56817DD686256A42006E6F93?OpenDocument


If you have a TRT-250 with Mod 5 or a TRT-250D with Mod 2 it has the fix
required by the AD.

Gerry

Beat me to it. :)

And the way to check the mod is to look for the label with the serial
number, the mod level is determined by looking at which number has been
taken off the sticker, or marked.



--
Posted via a free Usenet account from http://www.teranews.com

[Juan Jimenez[_1_]]

Should be. :)

"Turaga" > wrote in message
...
>
> ****************************
> Mine has the number five taken out, and it has just been at service and
> yellow-taged. So it should be ok, then I guess... :)
>
> Tor, Norway
> *****************************
>
>
> Juan Jimenez Wrote:
>> "Gerry Caron" wrote in message
>> ...-
>>
>> "Earls61" wrote in message
>> oups.com...-
>> Turaga,
>>
>> Did you know there is an old AD on
>> those?http://tinyurl.com/y5dgsh
>> -
>>
>> If you have a TRT-250 with Mod 5 or a TRT-250D with Mod 2 it has the
>> fix
>> required by the AD.
>>
>> Gerry-
>>
>> Beat me to it. :)
>>
>> And the way to check the mod is to look for the label with the serial
>> number, the mod level is determined by looking at which number has been
>>
>> taken off the sticker, or marked.
>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>
>
>
>
> --
> Turaga



--
Posted via a free Usenet account from http://www.teranews.com

[Rob Cherney]

On Fri, 3 Nov 2006 12:18:06 +0000, Turaga
> wrote:

>
>Do anyone have it. Need the piout for the 25-pin connector on my TERRA
>TRT-250 analog switch button transponder. Weekend is getting close, and
>I was planning of put in order my transponder for regardless flying
>inside the controllzone this weekend... :)

Here are some links you might find useful:





Rob-

[Juan Jimenez[_1_]]

"Rob Cherney" > wrote in message
...
> On Fri, 3 Nov 2006 12:18:06 +0000, Turaga
> > wrote:
>
>>
>>Do anyone have it. Need the piout for the 25-pin connector on my TERRA
>>TRT-250 analog switch button transponder. Weekend is getting close, and
>>I was planning of put in order my transponder for regardless flying
>>inside the controllzone this weekend... :)
>
> Here are some links you might find useful:
>
>
>
>
>
> Rob-

Nice!



--
Posted via a free Usenet account from http://www.teranews.com

[Rob Cherney]

On Wed, 8 Nov 2006 00:56:26 -0400, "Juan Jimenez" >
wrote:

>Nice!

Oops. Second link should have been:

ftp://24.227.190.27/Publications/TerraByTrimble/250DMM.PDF

Rob-
________________________________________
Rob Cherney
Ellicott City, Maryland