routing of multiple antenna cables in wood homebuilt

[[email protected]]

I am building a GP-4.

I am starting to fabricate the following antennas for the rear
fuselage:

transponder

comm 1

vor/glideslope

marker beacon



My question is can I bundle all of the coax into one run forward, or
should there ideally be some minimum separation from the cables in
order to minimize any interference from one another.



Thanks

[[email protected]]

Don't see why you can't bundle them together - they are all
individually shielded. I bundled my cables together and notice no
interference.
---------------------------------------------------
SQ2000 canard http://www.abri.com/sq2000

On Mar 15, 7:57 am, wrote:
> I am building a GP-4.
>
> I am starting to fabricate the following antennas for the rear
> fuselage:
>
> transponder
>
> comm 1
>
> vor/glideslope
>
> marker beacon
>
> My question is can I bundle all of the coax into one run forward, or
> should there ideally be some minimum separation from the cables in
> order to minimize any interference from one another.
>
> Thanks