EW Model D Logger

[John Scott]

Our club has an EW Model D logger. In the process of getting things ready
for flying this year, I got the loggers out, put in fresh batteries, and did
a test run in the car. I got a strange altitude plot from the EW model D.
It was very "notchy'' with the altitude not changing for several samples,
and then jumping. This was true for both the pressure altitude from the
internal sensor and the GPS altitude from the Garmin.

Looking at the altitude graphs on SeeYou and at the actual log file in
Notepad, I could correlate the "flat sections" with multiple sequential B
records where the altitude would not change for either the pressure altitude
or GPS. The pressure altitude only changes in increments of 5 meters. It
is always a multiple of 5 meters. The GPS altitude is always a multiple of
10 meters.

Anyone have any thoughts or suggestions?

John Scott

[David Starer]

Try removing the battery cover and inserting a piece of stiff wire (e.g.
straightened out paperclip) into the small hole in the panel that lies just
behind the end plate. This will do a full system reset.

David Starer

"John Scott" > wrote in message
.. .
> Our club has an EW Model D logger. In the process of getting things ready
> for flying this year, I got the loggers out, put in fresh batteries, and
> did a test run in the car. I got a strange altitude plot from the EW
> model D. It was very "notchy'' with the altitude not changing for several
> samples, and then jumping. This was true for both the pressure altitude
> from the internal sensor and the GPS altitude from the Garmin.
>
> Looking at the altitude graphs on SeeYou and at the actual log file in
> Notepad, I could correlate the "flat sections" with multiple sequential B
> records where the altitude would not change for either the pressure
> altitude or GPS. The pressure altitude only changes in increments of 5
> meters. It is always a multiple of 5 meters. The GPS altitude is always a
> multiple of 10 meters.
>
> Anyone have any thoughts or suggestions?
>
> John Scott
>

[Martin Gregorie[_1_]]

John Scott wrote:
> Our club has an EW Model D logger. In the process of getting things ready
> for flying this year, I got the loggers out, put in fresh batteries, and did
> a test run in the car. I got a strange altitude plot from the EW model D.
> It was very "notchy'' with the altitude not changing for several samples,
> and then jumping. This was true for both the pressure altitude from the
> internal sensor and the GPS altitude from the Garmin.
>
I'd expect that. From the manual, page 11 section 1.1.4

Altitude resolution: -350m - 10,000m: 5 metre steps
10,000m - 15,000m: 10 metre steps

Looks to me as if your model D is working correctly.


--
martin@ | Martin Gregorie
gregorie. | Essex, UK
org |

[Graham Paul]

At 23:36 01 April 2007, John Scott wrote:>Our club has an EW Model D logger. In the process
>of getting things ready >for flying this year, I got the loggers out, put in
>fresh batteries, and did >a test run in the car. I got a strange altitude plot
>from the EW model D. >It was very 'notchy'' with the altitude not changing
>for several samples, >and then jumping. This was true for both the pressure
>altitude from the >internal sensor and the GPS altitude from the Garmin.>>Looking at the altitude graphs on SeeYou and at the
>actual log file in >Notepad, I could correlate the 'flat sections' with
>multiple sequential B >records where the altitude would not change for either
>the pressure altitude >or GPS. The pressure altitude only changes in increments
>of 5 meters. It >is always a multiple of 5 meters. The GPS altitude
>is always a multiple of >10 meters.>>Anyone have any thoughts or suggestions?>>John Scott JohnYou have tested the system in a car, so the height
changes are small and happen slowly. The model 'D'
records in 5 metre steps, so what you describe is exactly
what we would expect to see, there is nothing wrong
with the unit.RegardsGraham Paul>>