View Full Version : PIK 20E main spar pin needed USA
Anyone out there have one available in USA or anywhere for that
matter!!
Thanks
Al
On Jun 14, 3:01 am, " >
wrote:
> Anyone out there have one available in USA or anywhere for that
> matter!!
>
> Thanks
>
> Al
Out with the story !
What happened ?
Ex-wife has the old one ?
See ya, Dave
Bob Kuykendall
June 14th 07, 04:39 PM
Earlier, wrote:
> Out with the story !
> What happened ?
I guess they don't have lathes out where Al lives.
bumper
June 14th 07, 05:07 PM
Bob,
Actually, they do. There's an unsubstantiated rumor of a fairly complete
machine shop in bumper's hangar. Maybe Al has been ashamed to ask as he's
overwhelmed with guilt over bad-mouthing the wildly popular "Quiet Vent" (he
flew in Leo's glider with a defective, superseded earlier version that
buzzed like an oboe!).
bumper
Minden, NV
QV quiet vent & MKII "high tech" yaw string
bumperm at att dot net
"Bob Kuykendall" > wrote in message
oups.com...
> Earlier, wrote:
>
>> Out with the story !
>> What happened ?
>
> I guess they don't have lathes out where Al lives.
>
It wasn't an oboe more like an 80yr old little old lady who had just
eaten a can of beans!!
(now everyone pucker your lips like your going to kiss and blow
hard.... that was the sound)
So disgusted at the distraction to the flight it was making I ripped
it off and ejected it from the plane.
However........
The Illustrious Mr Morgan did install an new version on the front
cockpit of the DG1000 when we flew it last and I must say there was a
small but noticeable lowering of noise in the cockpit (telling Leo
stop complaining about the O2 level helped a lot too ;) )
So if you have an aversion to wind noise and don't eat beans before
flying then the Quiet vent MkII might just be the thing you need.
There you go John.....
now can you please turn me up a new spar pin, I will drop the old one
off to you on Friday :)
Regards
Al
On Jun 14, 9:07 am, "bumper" > wrote:
> Bob,
>
> Actually, they do. There's an unsubstantiated rumor of a fairly complete
> machine shop in bumper's hangar. Maybe Al has been ashamed to ask as he's
> overwhelmed with guilt over bad-mouthing the wildly popular "Quiet Vent" (he
> flew in Leo's glider with a defective, superseded earlier version that
> buzzed like an oboe!).
>
> bumper
> Minden, NV
> QV quiet vent & MKII "high tech" yaw string
> bumperm at att dot net
>
> "Bob Kuykendall" > wrote in message
>
> oups.com...
>
> > Earlier, wrote:
>
> >> Out with the story !
> >> What happened ?
>
> > I guess they don't have lathes out where Al lives.
JJ Sinclair
June 14th 07, 10:03 PM
On Jun 14, 12:01 am, " >
wrote:
> Anyone out there have one available in USA or anywhere for that
> matter!!
>
> Thanks
>
> Al
Hey Al,
I saw a dildo in a sex toy store that looked a lot like a main wing
pin.......painted pink. Could that be yours?
:>) JJ
JJ you've got to stop hanging around those places trying to pick up
"bus stop skank".
Al
On Jun 14, 2:03 pm, JJ Sinclair > wrote:
> On Jun 14, 12:01 am, " >
> wrote:
>
> > Anyone out there have one available in USA or anywhere for that
> > matter!!
>
> > Thanks
>
> > Al
>
> Hey Al,
> I saw a dildo in a sex toy store that looked a lot like a main wing
> pin.......painted pink. Could that be yours?
> :>) JJ
Papa3
June 14th 07, 11:50 PM
On Jun 14, 6:21 pm, " >
wrote:
> JJ you've got to stop hanging around those places trying to pick up
> "bus stop skank".
>
> Al
>
> On Jun 14, 2:03 pm, JJ Sinclair > wrote:
>
>
>
> > On Jun 14, 12:01 am, " >
> > wrote:
>
> > > Anyone out there have one available in USA or anywhere for that
> > > matter!!
>
> > > Thanks
>
> > > Al
>
> > Hey Al,
> > I saw a dildo in a sex toy store that looked a lot like a main wing
> > pin.......painted pink. Could that be yours?
> > :>) JJ- Hide quoted text -
>
> - Show quoted text -
Papa3
June 14th 07, 11:50 PM
On Jun 14, 6:21 pm, " >
wrote:
> JJ you've got to stop hanging around those places trying to pick up
> "bus stop skank".
>
> Al
>
> On Jun 14, 2:03 pm, JJ Sinclair > wrote:
>
>
>
> > On Jun 14, 12:01 am, " >
> > wrote:
>
> > > Anyone out there have one available in USA or anywhere for that
> > > matter!!
>
> > > Thanks
>
> > > Al
>
> > Hey Al,
> > I saw a dildo in a sex toy store that looked a lot like a main wing
> > pin.......painted pink. Could that be yours?
> > :>) JJ- Hide quoted text -
>
> - Show quoted text -
Just when I thought we'd hit bedrock...
On Jun 14, 6:50 pm, Papa3 > wrote:
> On Jun 14, 6:21 pm, " >
> wrote:
>
>
>
> > JJ you've got to stop hanging around those places trying to pick up
> > "bus stop skank".
>
> > Al
>
> > On Jun 14, 2:03 pm, JJ Sinclair > wrote:
>
> > > On Jun 14, 12:01 am, " >
> > > wrote:
>
> > > > Anyone out there have one available in USA or anywhere for that
> > > > matter!!
>
> > > > Thanks
>
> > > > Al
>
> > > Hey Al,
> > > I saw a dildo in a sex toy store that looked a lot like a main wing
> > > pin.......painted pink. Could that be yours?
> > > :>) JJ- Hide quoted text -
>
> > - Show quoted text -
>
> Just when I thought we'd hit bedrock...
They're not even close yet, stand back and hold your nose...
See ya, Dave "YO"
bumper
June 15th 07, 02:37 AM
Al,
Was that an apology? Didn't sound like an apology!
You're gonna have to drop off more than the old one, depending on what you'd
like a new one made of, it would be nice to have suitable material to chuck
into the lathe. When you're looking, it should be shiny, silver, and
preferably hard - - as your future may depend on it, it would be good to
have the right stuff. Flying in the face of JJ's recommendation, it would be
best to avoid pink material if possible.
bumper
> wrote in message
ups.com...
>
> It wasn't an oboe more like an 80yr old little old lady who had just
> eaten a can of beans!!
> (now everyone pucker your lips like your going to kiss and blow
> hard.... that was the sound)
>
> So disgusted at the distraction to the flight it was making I ripped
> it off and ejected it from the plane.
>
> However........
>
> The Illustrious Mr Morgan did install an new version on the front
> cockpit of the DG1000 when we flew it last and I must say there was a
> small but noticeable lowering of noise in the cockpit (telling Leo
> stop complaining about the O2 level helped a lot too ;) )
> So if you have an aversion to wind noise and don't eat beans before
> flying then the Quiet vent MkII might just be the thing you need.
>
> There you go John.....
>
> now can you please turn me up a new spar pin, I will drop the old one
> off to you on Friday :)
>
> Regards
>
> Al
>
>
>
>
> On Jun 14, 9:07 am, "bumper" > wrote:
>> Bob,
>>
>> Actually, they do. There's an unsubstantiated rumor of a fairly complete
>> machine shop in bumper's hangar. Maybe Al has been ashamed to ask as he's
>> overwhelmed with guilt over bad-mouthing the wildly popular "Quiet Vent"
>> (he
>> flew in Leo's glider with a defective, superseded earlier version that
>> buzzed like an oboe!).
>>
>> bumper
>> Minden, NV
>> QV quiet vent & MKII "high tech" yaw string
>> bumperm at att dot net
>>
>> "Bob Kuykendall" > wrote in message
>>
>> oups.com...
>>
>> > Earlier, wrote:
>>
>> >> Out with the story !
>> >> What happened ?
>>
>> > I guess they don't have lathes out where Al lives.
>
>
HEHE....
This has become a whole thread unto itself
I think JJ needs to change his contest ID to DD ;)
Laughing my ass off here.
Cheers
Al
On Jun 14, 6:10 pm, wrote:
> On Jun 14, 6:50 pm, Papa3 > wrote:
>
>
>
> > On Jun 14, 6:21 pm, " >
> > wrote:
>
> > > JJ you've got to stop hanging around those places trying to pick up
> > > "bus stop skank".
>
> > > Al
>
> > > On Jun 14, 2:03 pm, JJ Sinclair > wrote:
>
> > > > On Jun 14, 12:01 am, " >
> > > > wrote:
>
> > > > > Anyone out there have one available in USA or anywhere for that
> > > > > matter!!
>
> > > > > Thanks
>
> > > > > Al
>
> > > > Hey Al,
> > > > I saw a dildo in a sex toy store that looked a lot like a main wing
> > > > pin.......painted pink. Could that be yours?
> > > > :>) JJ- Hide quoted text -
>
> > > - Show quoted text -
>
> > Just when I thought we'd hit bedrock...
>
> They're not even close yet, stand back and hold your nose...
> See ya, Dave "YO"
Contrary to JJ's love of sex toys and soaring, the old one is a steel
pin.
It has a flange at the end with a locking bar that goes through it.
Roger thinks he has some bar stock that will work and he will call you
after I give him the OD of the the current one.
Cheers
Al
On Jun 14, 6:37 pm, "bumper" > wrote:
> Al,
>
> Was that an apology? Didn't sound like an apology!
>
> You're gonna have to drop off more than the old one, depending on what you'd
> like a new one made of, it would be nice to have suitable material to chuck
> into the lathe. When you're looking, it should be shiny, silver, and
> preferably hard - - as your future may depend on it, it would be good to
> have the right stuff. Flying in the face of JJ's recommendation, it would be
> best to avoid pink material if possible.
>
> > wrote in message
>
> ups.com...
>
>
>
> > It wasn't an oboe more like an 80yr old little old lady who had just
> > eaten a can of beans!!
> > (now everyone pucker your lips like your going to kiss and blow
> > hard.... that was the sound)
>
> > So disgusted at the distraction to the flight it was making I ripped
> > it off and ejected it from the plane.
>
> > However........
>
> > The Illustrious Mr Morgan did install an new version on the front
> > cockpit of the DG1000 when we flew it last and I must say there was a
> > small but noticeable lowering of noise in the cockpit (telling Leo
> > stop complaining about the O2 level helped a lot too ;) )
> > So if you have an aversion to wind noise and don't eat beans before
> > flying then the Quiet vent MkII might just be the thing you need.
>
> > There you go John.....
>
> > now can you please turn me up a new spar pin, I will drop the old one
> > off to you on Friday :)
>
> > Regards
>
> > Al
>
> > On Jun 14, 9:07 am, "bumper" > wrote:
> >> Bob,
>
> >> Actually, they do. There's an unsubstantiated rumor of a fairly complete
> >> machine shop in bumper's hangar. Maybe Al has been ashamed to ask as he's
> >> overwhelmed with guilt over bad-mouthing the wildly popular "Quiet Vent"
> >> (he
> >> flew in Leo's glider with a defective, superseded earlier version that
> >> buzzed like an oboe!).
>
> >> bumper
> >> Minden, NV
> >> QV quiet vent & MKII "high tech" yaw string
> >> bumperm at att dot net
>
> >> "Bob Kuykendall" > wrote in message
>
> oups.com...
>
> >> > Earlier, wrote:
>
> >> >> Out with the story !
> >> >> What happened ?
>
> >> > I guess they don't have lathes out where Al lives.
126Driver
June 15th 07, 01:08 PM
Yeah, wouldn't want to have a pin-ile disfunction ...
On Jun 14, 9:37 pm, "bumper" > wrote:
> Al,
>
> Was that an apology? Didn't sound like an apology!
>
> You're gonna have to drop off more than the old one, depending on what you'd
> like a new one made of, it would be nice to have suitable material to chuck
> into the lathe. When you're looking, it should be shiny, silver, and
> preferably hard - - as your future may depend on it, it would be good to
> have the right stuff. Flying in the face of JJ's recommendation, it would be
> best to avoid pink material if possible.
>
JJ Sinclair
June 15th 07, 02:04 PM
On Jun 14, 3:50 pm, Papa3 > wrote:
> On Jun 14, 6:21 pm, " >
> wrote:
>
>
>
>
>
> > JJ you've got to stop hanging around those places trying to pick up
> > "bus stop skank".
>
> > Al
>
> > On Jun 14, 2:03 pm, JJ Sinclair > wrote:
>
> > > On Jun 14, 12:01 am, " >
> > > wrote:
>
> > > > Anyone out there have one available in USA or anywhere for that
> > > > matter!!
>
> > > > Thanks
Hey, Al
I just found 25 & 30 mm pins in the barn.....................what
size do you need? Guess we could soak one in a VIAGRA solution if your
receptical is bigger and there's the length to
consider........................I'm told its best when you touch the
bottom and fill up the sides,
JJ
> > > > Al
>
> > > Hey Al,
> > > I saw a dildo in a sex toy store that looked a lot like a main wing
> > > pin.......painted pink. Could that be yours?
> > > :>) JJ- Hide quoted text -
>
> > - Show quoted text -
>
> Just when I thought we'd hit bedrock...- Hide quoted text -
>
> - Show quoted text -
vBulletin® v3.6.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.