FSX: G1000 panel, can't change NAV frequency

[[email protected]]

I just installed FSX and tried out the 172 with G1000 panel. I have
never used a G1000 panel, but I'm curious.

Strangely, if I click on the "NAV" button on the upper left corner of
the panel, I can only change the digits to the right of the decimal
point,
not the integer portion of the frequencies. So I can cycle through
a VOR frequency of 113.00 -> 113.95, but I can not change it
to 112.10.

I google'ed around and still can not find anything (not even from
Garmin's various guides online).

P S

[[email protected]]

On Jul 1, 10:08 pm, wrote:
> I just installed FSX and tried out the 172 with G1000 panel. I have
> never used a G1000 panel, but I'm curious.
>
> Strangely, if I click on the "NAV" button on the upper left corner of
> the panel, I can only change the digits to the right of the decimal
> point,
> not the integer portion of the frequencies. So I can cycle through
> a VOR frequency of 113.00 -> 113.95, but I can not change it
> to 112.10.
>
> I google'ed around and still can not find anything (not even from
> Garmin's various guides online).
>
> P S

I fly a G1000 ITRW, and quite honestly, the FSX rendition in the 172
is pretty useless for IFR. Many of the important/vital functions don't
work at all. Tuning the nav's is obviously a big issue, but the
"procedures" functions don't work either. You can access the select/
load procedures, but the cursor button doesn't work properly, and you
can't hit the "OK". to actually load or activate the procedure. I
don't know how you're supposed to fly an approach when you can't tune
the navs or load a procedure.