Re: propeller calculation and how to build

[jgarner]

I saw this posted a while ago. He used software from Bates Engineering.
You can follow the link. I enjoyed reading it.

http://k0lee.com/propfab.html


"fede" > wrote in message
...
> Hello, All!
>
>
> I want to build a propeller (wood I think) where can I have information to
> calculate and how to build ?
>
>
> Best regards, fede. E-mail:
>
>

[Daniel]

fede wrote ...

> I want to build a propeller (wood I think) where can I have information to
> calculate and how to build ?


I would start with "How I Make Wood Propellers" by Al Schubert. He
hand typed it about 20 years ago, it's quite thorough and easily
understood. Available freely on the net as a large (11.2 MB) PDF
file:
http://www.hsweb.net/propellers/HowIMakeProp.pdf
http://www.mykitplane.com/Planes/PeoplesFiles/HowIMakeProp.pdf

Daniel

[Barnyard BOb --]

>> I want to build a propeller (wood I think) where can I have information to
>> calculate and how to build ?
>
>
>I would start with "How I Make Wood Propellers" by Al Schubert. He
>hand typed it about 20 years ago, it's quite thorough and easily
>understood. Available freely on the net as a large (11.2 MB) PDF
>file:
> http://www.hsweb.net/propellers/HowIMakeProp.pdf
> http://www.mykitplane.com/Planes/PeoplesFiles/HowIMakeProp.pdf
>
>Daniel
++++++++++++++++++++++++++++++++++++

Not found on server when I looked for it......

> http://www.hsweb.net/propellers/HowIMakeProp.pdf



Barnyard BOb --

[Jan Carlsson]

Fede,

The program I made for my convenience, and now sell on the net, is made for
wood propellers, it is easy to use and understand and is available in a pure
metric or a "US" version with output in inch and mm.

Best

Jan Carlson

www.jcpropellerdesign.com

"fede" > skrev i meddelandet
...
> Hello, All!
>
>
> I want to build a propeller (wood I think) where can I have information to
> calculate and how to build ?
>
>
> Best regards, fede. E-mail:
>
>

[Daniel]

Barnyard BOb wrote ...
>
> Not found on server when I looked for it......
>
> > http://www.hsweb.net/propellers/HowIMakeProp.pdf
>

Jeez Louise Bob! Who wipes your butt for you? Any notion why 2 URL's
were offered? (Yeah I checked, the other one is still live)

Daniel

[Barnyard BOb --]

>>
>> Not found on server when I looked for it......
>>
>> > http://www.hsweb.net/propellers/HowIMakeProp.pdf
>>
>
>Jeez Louise Bob! Who wipes your butt for you? Any notion why 2 URL's
>were offered? (Yeah I checked, the other one is still live)
>
>Daniel
+++++++++++++++++++++++++++++

Why would anybody list a url they knew didn't work?
Gimme a break and **** off, jerk.


Barnyard BOb --

[Barnyard BOb --]

>>
>> Not found on server when I looked for it......
>>
>> > http://www.hsweb.net/propellers/HowIMakeProp.pdf
>>
>
>Jeez Louise Bob! Who wipes your butt for you? Any notion why 2 URL's
>were offered? (Yeah I checked, the other one is still live)
>
>Daniel
++++++++++++++++++++++++++++++++++++++++++++++++++ +

Recognize your post below? Seems you wake up on the
wrong side of bed with poor manners a lot. - Barnyard BOb


"You're right. I apologize. Woke up on the wrong side or something &
I've never suffered fools well. Shoulda recognized it for a troll,
but I didn't & took the bait. Time to go into "think on it for 24
hours before posting" mode. Thanks for setting me straight with
better manners than I displayed.

Daniel"

[Daniel]

Jerry Wass wrote ...
> Perhaps if either of you kind gentlemen roll out of bed this morning in a
> better mood
> would you look for the pdf file ...

Hi Jerry,

I had posted 2 links without checking them. One has since been
reported dead. The other I then checked since someone was confused.
It works:

http://www.mykitplane.com/Planes/PeoplesFiles/HowIMakeProp.pdf

Daniel